Abstract:One of the most effective countermeasures for mitigating cable vibration is to install mechanical dampers near the anchorage of the cable. Most of the dampers used in the field are so-called passive dampers where their parameters cannot be changed once designed. The parameters of passive dampers are usually determined based on the optimal damper force obtained from the universal design curve for linear dampers, which will provide a maximum additional damping for the cable. As the optimal damper force is chosen based on a predetermined principal vibration mode, passive dampers will be most effective if cable undergoes single-mode vibration where the vibration mode is the same as the principal mode used in the design. However, in the actual engineering practice, multi-mode vibrations are often observed for cables. Therefore, it is desirable to have dampers that can suppress different modes of cable vibrations simultaneously. In this paper, MR dampers are proposed for controlling multi-mode cable vibrations, because of its ability to change parameters and its adaptability of active control without inquiring large power resources. Although the highly nonlinear feature of the MR material leads to a relatively complex representation of its mathematical model, effective control strategies can still be derived for suppressing multi-mode cable vibrations based on nonlinear modelling, as proposed in this paper. Firstly, the nonlinear Bouc-wen model is employed to accurately portray the salient characteristics of the MR damper. Then, the desired optimal damper force is determined from the universal design curve of friction dampers. Finally, the input voltage (current) of MR damper corresponding to the desired optimal damper force is calculated from the nonlinear Bouc-wen model of the damper using a piecewise linear interpolation scheme. Numerical simulations are carried out to validate the effectiveness of the proposed control algorithm for mitigating multi-mode cable vibrations induced by different external excitations.

Simulation Study of Semi-Active Control of Stay Cable Using MR Damper under Wind Loads

Stochastic Optimal Semi-Active Control of Stay Cables by Using Magneto-Rheological Damper

Semi-active Control of Cable Vibration Using MR Damper under Wind Loads

Vibration Mitigation of Stay Cable Using Optimally Tuned MR Damper

Full-scale experimental verification on the vibration control of stay cable using optimally tuned MR damper

Vibration Control of Stay Cable Using Mr Damper Based on Optimal Nonlinear Damper Force

SIMULATION ANALYSIS FOR VIBRATION MITIGATION OF STAY-CABLE BY MR DAMPERS UNDER SEMI-ACTIVE CONTROL STRATEGY

Semi - active control strategy of stay - cable vibration using MR dampers

Semi-Active Vibration Control of Stay Cables Incorporated with Magneto-Rheological Fluid Damper

Semi-Active Vibration Control Of Stay Cable Installed With Magnetorheogical Fluid Dampers

Cable Vibration Control with a Semiactive MR Damper-Numerical Simulation and Experimental Verification

MR Dampers-Based Semi-Active Control Strategy of Cable-Stayed Vibration

Out-of-plane wind vibration responses of super-long stayed-cable under semi-active control

Numerical Simulation of Vibration Control for Stay Cable Using MR Dampers

Experimental investigation on vibration control of one stay cable using one magnetorheological fluid damper

Experimental Study on Cable Vibration Control Using Electro-Rheological Damper

Optimal Control of Cable Vibration using MR Damper based on Nonlinear Modeling *T

Non-Model Based Vibration Control of Stay Cables Using Magneto-Rheological Damper

THE APPLICATION OF MR DAMPER IN RAIN-WIND-INDUCED VIBRATION REDUCTION OF STAYED CABLE

Experiment of Semi-active Control of Cable-MR Damper System

Multi-mode Cable Vibration Control Using MR Damper Based on Nonlinear Modeling