Abstract:As the world's first time implementation of MR-based smart damping technique in bridge structures, a total of 312 semi-active magneto-rheological (MR) dampers have recently been installed on the cable-stayed Dongting Lake Bridge for wind-rain-induced cable vibration control. Prior to the full implementation, a comprehensive field vibration test, has been conducted on the longest cable of 150 in to identify and compare damping performance of the cable-damper system under different damper installation setups and under a wide spectrum of voltage inputs to the MR dampers. Forced vibration experiments were carried out for the cable without damper, with single-damper setup, and with twin-damper setup, respectively. One purpose of this in-situ experimental investigation is to determine the optimal input voltage which achieves maximum system damping for the aim of designing a multi-switch control strategy. Due to geometric nonlinearity of cables and hysteretic nonlinearity of MR dampers, the equivalent modal properties of the cable-damper system are deemed to be amplitude-dependent. Keeping this in mind, a Hilbert transform based method is deployed in the present study to identify the amplitude-dependent natural frequencies and modal damping from the sinusoidal-decay response data. The experimental and identification results show that the equivalent modal damping ratios of the system are noticeably dependent on vibration amplitude and the relevance of the natural frequencies to vibration amplitude is negligible. The single-damper setup is competitive with the twin-damper setup in suppressing in-plane vibration of the cables. However, when mitigation of cable out-of-plane vibration is also required, the twin-damper setup performs much better. For both setups, the value of optimal voltage is found to be mode-dependent and amplitude-dependent.

Modeling of a Full-Scale MR Damper and Its Application in Open-Loop Vibration Control of Stay Cables

Development of a Full-Scale Magnetorheological Damper Model for Open-Loop Cable Vibration Control

Stochastic Optimal Semi-Active Control of Stay Cables by Using Magneto-Rheological Damper

Research on a New Mechanical Model for MR Damper Based on Neuron Sigmoid Transfer Function

Design optimization of Magneto-rheological (MR) dampers for open-loop vibration control of stay cables

Dynamic Characteristics and Modeling of A New Magnetorheological Damper for Broadband Vibration Control

Theoretical and Experimental Studies on Semi-Active Feedback Control of Cable Vibration Using MR Dampers

Design Guidelines for Open-Loop Vibration Control of Stay Cables Using MR Dampers

Numerical Simulation of Vibration Control for Stay Cable Using MR Dampers

MR Dampers-Based Semi-Active Control Strategy of Cable-Stayed Vibration

Research on Improved Magnetorheological Damper for Wide-Band Vibration Control

SIMULATION ANALYSIS FOR VIBRATION MITIGATION OF STAY-CABLE BY MR DAMPERS UNDER SEMI-ACTIVE CONTROL STRATEGY

Amplitude-dependent Frequency and Damping Identification of Bridge Cables with MR Dampers in Different Setups

Cable Vibration Control Using Magnetorheological Dampers

Modeling of Passive Adaptive MR Damper

State-Derivative Feedback Control Of Cable Vibration Using Semiactive Magnetorheological Dampers

Design Formulas for Vibration Control of Taut Cables Using Passive MR Dampers

Semi - active control strategy of stay - cable vibration using MR dampers

Modal Damping and Stepping-Switch Control of Stay Cables with Magnetorheological Fluid Dampers

Neuro-control of Cable Vibration Using Semi-Active Magneto-Rheological Dampers

Optimal Marker of MR Damper for Stay-Cable with Semi-Active Vibration Control