Abstract:Ruled surfaces found in engineering parts are often blended with a constraint surface, like the blade surface and hub surface of a centrifugal impeller. It is significant to accurately machine these ruled surfaces in flank milling with interference-free and fairing tool path, while cur-rent models in fulfilling these goals are complex and rare. In this paper, a tool path planning method with optimal cutter locations (CLs) is proposed for 5-axis flank milling of ruled surfaces under mul-tiple geometric constraints. To be specific, a concise three-point contact tool positioning model is firstly developed for a cylindrical cutter. Different tool orientations arise when varying the three contact positions and a tool orientation pool with acceptable cutter-surface deviation is constructed using a meta-heuristic algorithm. Fairing angular curves are derived from candidates in this pool, and then curve registration for cutter tip point on each determined tool axis is performed in respect of interference avoidance and geometric smoothness. On this basis, an adaptive interval determina-tion model is developed for deviation control of interpolated cutter locations. This model is designed to be independent of the CL optimization process so that multiple CLs can be planned simultaneously with parallel computing technique. Finally, tests are performed on representative surfaces and the results show the method has advantages over previous meta-heuristic tool path planning approaches in both machining accuracy and computation time, and receives the best com-prehensive performance compared to other multi-constrained methods when machining an impel-ler. (c) 2023 Production and hosting by Elsevier Ltd. on behalf of Chinese Society of Aeronautics and Astronautics. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/ licenses/by-nc-nd/4.0/).

Tool path generation by offsetting curves on polyhedral surfaces based on mesh flattening

Contour offset approach to generate tool path for polyhedral surfaces machining

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

Contour-Parallel Tool Path Generation for Three-Axis Mesh Surface Machining Based on One-Step Inverse Forming

Smooth contour-parallel tool path generation for high-speed machining through a dual offset procedure

Tool-path generation based on angle-based flattening

Iso-parametric Tool Path Generation from Triangular Meshes for Free-Form Surface Machining

A Mapping-Based Approach to Eliminating Self-Intersection of Offset Paths on Mesh Surfaces for CNC Machining

Contour-parallel offset machining for trimmed surfaces based on conformal mapping with free boundary

Iso-Scallop Controlled Tool Path Generation for Free-Form Surfaces Based on Level Set Method

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

Contour parallel tool path planning based on conformal parameterisation utilising mapping stretch factors

Iso-Parametric Tool Path Planning for Five-Axis Compound Surface Machining

Constant Scallop Tool Path for Triangular Surface Machining

The Tool Paths Generation Approach Based on Level-Set Methods in Die-Cavities NC Machining

Exploratory Study of Spiral Nc Tool Path Generation on Triangular Mesh Based on Local Subdivision

Non-singular tool path planning by translating tool orientations in C-space

Generation of offset surface for tool path in NC machining through level set methods

Non-retraction toolpath generation for irregular compound freeform surfaces with the LKH TSP solver

Tool path generation for 5-axis flank milling of ruled surfaces with optimal cutter locations considering multiple geometric constraints

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined