Abstract:Serrated chips, consisting of extremely uneven plastic deformation, are a prominent feature of high-speed machining of difficult-to-machine materials. This paper focuses on the evolution of chip form, chip morphology features (chip free surface, tool-chip contact surface, and chip edge), and chip segment parameters in subsequent high-speed ( v c =50 and 150 m min −1 ) machining of selective laser melted (SLMed) Ti6Al4V alloys, which are significantly different from conventional Ti6Al4V alloy in microstructure, mechanical properties and machinability. The effect of laser beam scanning schemes (0°, 67.5°, and 90°), machined surfaces (top and front), and cutting speeds on serrated chip characteristics of SLMed Ti6Al4Valloys was investigated. Based on the Johnson-Cook constitutive model of SLMed Ti6Al4V alloys, an orthogonal cutting model was developed to better understand the effect of physical-mechanical properties on the shear localization, which dominates the formation mechanism of serrated chips in post-machining of SLMed Ti6Al4V alloy. The results showed that the critical cutting speed (CCS) for chip serration of SLMed Ti6Al4V alloy is lower than that for serrated chips of conventional Ti6Al4V alloy, and the serrated profile of SLMed Ti6Al4V chips was more regular and pronounced. Besides, due to anisotropic microstructure and mechanical properties of SLMed Ti6Al4V alloys, the serration degree of chips produced on the top surfaces of SLMed Ti6Al4V alloys is more prominent than that of chips generated on the front surfaces. In addition, because of the poor deformation coordination and high plastic flow stresses of needle-like martensite α′, the plastic flow and grain distortion in the adiabatic shear band (ASB) of SLMed Ti6Al4V chips are significantly smaller than those in the ASB of conventional Ti6Al4V with equiaxed grains.

A Reliable Method for Predicting Serrated Chip Formation in High-Speed Cutting: Analysis and Experimental Verification

Simulation of Chip Formation in High-Speed Hard Machining

The Finite Element Analysis Of Serrated Chip Formation In High-Speed Cuffing Auto Panel Dies

Finite Element Simulation of Serrated Chip Formation in High-speed Milling of A lloy Cast Iron

Theoretical Analysis of Serrated Chip Formation Based on Ideal Models in High Speed Cutting

Effect of cutting conditions on the serrated chip formation in high-speed cutting

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Finite Element Simulation of High-Speed Cutting

Understanding The Deformation Of Metals In High Speed Cutting

Serrated chip characteristics and formation mechanism in high-speed machining of selective laser melted Ti6Al4V alloys

Research on the analytical modeling of critical conditions of serrated Chip formation based on thermal-mechanical coupled material behavior

Adiabatic shear behavior and cutting force prediction modeling of FV520B steel

Numerical Analysis of Serrated Chip Formation Mechanism with Johnson-Cook Parameters in Micro-Cutting of Ti6Al4V

Characterization of serrated chip formation based on in-situ imaging analysis in orthogonal cutting

Prediction of critical cutting condition for onset of serrated chip in ductile metallic material using dynamic yield stress

Experimental and Finite Element Analysis of the Formation Mechanism of Serrated Chips of Nickel-Based Superalloy Inconel 718

Numerical investigation on serrated chip formation during high-speed milling of Ti-6Al-4V alloy

Chip Formation Mechanism in Dry Hard High-Speed Orthogonal Turning of Hardened AISI D2 Tool Steel with Different Hardness Levels

Predicting The Effects Of Rake Angle, Cutting Speed And Feed Rate On The Chip Morphology In Hard Turning

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Study on the Formation Mechanism of Serrated Chips in the Cutting Process of Powder Metallurgy Superalloys Based on a Modified J–C Constitutive Relation Simulation Model