Abstract:In the modern world, many products are disposable or have a very short lifespan, while at the same time, those products are made from materials that will remain in the environment in the form of waste for hundreds or even thousands of years. It is a serious problem; non-biodegradable polymer wastes are part of environmental pollution and generate microplastics, which accumulate in the organisms of living beings. One of the proposed solutions is biodegradable polymers and their composites. In our work, three types of polylactide-based composites with plant-derived fillers: microcellulose powder, short flax fibers, and wood flour at 2 wt.% were prepared. Poly(lactic acid) (PLA)-based biocomposite properties were characterized in terms of mechanical and surface properties together with microscopic analysis and Fourier-transform infrared spectroscopy (FTIR), before and after a UV (ultraviolet)-light-aging process to determine the effects of each cellulose-based additive on the UV-induced degradation process. This research shows that the addition of a cellulose additive can improve the properties of the material in terms of the UV-aging process, but the form of the chosen cellulose form plays a crucial role in this case. The testing of physicochemical properties demonstrated that not only can mechanical properties be improved, but also the time of degradation under UV light exposure can be controlled by the proper selection of the reinforcing phase and the parameters of the extrusion and injection molding process. The obtained results turned out to be very interesting, not only in terms of the cost reduction of the biocomposites themselves, as mainly the waste from the wood industry was used as a low-cost filler, but also that the additive delays the aging process occurring during UV light exposure. Even a small, 2 wt.% addition of some of the tested forms of cellulose delayed surface degradation, which is one of the most important factors affecting the biodegradation process.

UV accelerated aging properties of wheat straw/PP wood plastic composite

Composites of Polypropylene Reinforced with Ultrafine Bamboo-char: Morphology, Mechanical and Thermal Properties

A Comprehensive Study On The Accelerated Weathering Properties Of Polypropylene-Wood Composites With Non-Metallic Materials Of Waste-Printed Circuit Board Powders

Effects of inorganic pigments on color and accelerated weathering of wheat straw fiber /polyvinyl chloride composites

Performance Analysis of Four Plant Fiber/Polyvinyl Chloride Composites under Two Degradation Conditions with Water or Seawater with Xenon Lamp

Effects of Environmental Aging on the Durability of Wood-Flour Filled Recycled PET/PA6 Wood Plastic Composites

STUDY ON PREPARATION AND PROPERTIES OF ANTI-ULTRAVIOLET AGING WOOD-PLASTIC COMPOSITES

Comparison of properties of wood-plastic composites based on alternate degradation in seawater and acid rain

Effect of Heat Oxygen Aging on Mechanical Properties and Heat Resistance of Wood Rubber Plastic Ternary Composites

Sustainable composites from agricultural waste: The use of steam explosion and surface modification to potentialize the use of wheat straw fibers for wood plastic composite industry

Effect of antiaging agents on the outdoor natural weathering of bamboo powder/polypropylene foamed composites

Ageing mechanism of composite pultruded profiles in UV-condensation and nature ageing environments

Effect of UV‐water weathering on the mechanical properties of flax‐fiber‐reinforced polymer composites

Natural Aging of Reprocessed Polypropylene Composites Filled with Sustainable Corn Fibers

Application of modified rice straw/PP woodplastic composite material in landscape

Effect of wood flour and compatibilizer content on the properties of wood-plastic composites

Natural Photo-Aging Degradation of Polypropylene Nanocomposites

Aging Process of Biocomposites with the PLA Matrix Modified with Different Types of Cellulose

Durability of High-Density Polyethylene (HDPE)- and Polypropylene (PP)-Based Wood-Plastic Composites—Part 1: Mechanical Properties of the Composite Materials

Effects of polypropylene compositions and processing conditions on its aging resistance under tropical environments

Utjecaj prirodnog izlaganja vremenskim utjecajima na svojstva kompozita od drvnog brašna i recikliranog polipropilena