Abstract:The relatively low specific capacitance of flexible carbons hinders their practical application for fabricating high-performance flexible supercapacitors. In this work, a surface engineering method is proposed to boost the supercapacitive performance of the flexible carbon. In this method, a flexible carbon was fabricated from carbon felt via co-activation with potassium argininate and potassium hydroxide (KOH) as activators, and the resulting material is abbreviated as AKCF. Unlike traditional KOH activation processes, the addition of potassium argininate can produce a micro-graphitized carbon layer to be the outer layer of AKCF fibers for achieving better electronic transfer. Due to the improved conductivity and lower charge transfer resistance endowed by a thin micro-graphitized carbon layer, the capacitance of the AKCF-0.1 (0.1 M arginine was used) electrode obtained by the co-activation process is elevated to a 1.8-fold higher value of 403 C.g(-1) (2583 mC.cmz) relative to the AKCF-0 (0 M arginine was used) electrode prepared by KOH activation alone (222 C.g(-1) or 1369 mC.cmz). Moreover, this AKCF-0.1 electrode also displays satisfactory rate capability (66% capacitance retention after a 20-fold current increase) and highly stable cycling performance (no capacitance decline after 20,000 cycles). In addition, the asymmetric supercapacitors constructed with this AKCF-0.1 electrode as the flexible negative electrode expresses high energy densities of 68.4 Wh.kg(-1) and 0.139 mWh.cm(-2) in aqueous and gel electrolytes, respectively. (C) 2021 Elsevier Inc. All rights reserved.

Capacitive Performance of a Heteroatom-Enriched Activated Carbon in Concentrated Sulfuric Acid

Preparation and Electrochemical Properties of PF-based Activated Carbon

Boosting Supercapacitive Performance of Flexible Carbon Via Surface Engineering.

Cooking Carbon with Protic Salt: Nitrogen and Sulfur Self-Doped Porous Carbon Nanosheets for Supercapacitors

Sulfur-doped carbon nanotubes with hierarchical micro/mesopores for high performance pseudocapacitive supercapacitors

Enabling high surface and space utilization of activated carbon for supercapacitors by homogeneous activation

Large-surface-area activated carbon with high density by electrostatic densification for supercapacitor electrodes

Electrospun activated carbon nanofibers for supercapacitor electrodes

Sulfurized activated carbon for high energy density supercapacitors

High-performance supercapacitor electrode at commercial-level mass loading from N-enriched activated carbon derived from soybean dregs

Preparation and Electrochemical Performance of Hollow Activated Carbon Fiber Self-Supported Electrode for Supercapacitor

Coal-Derived Porous Activated Carbon With Ultrahigh Specific Surface Area And Excellent Electrochemical Performance For Supercapacitors

Rational construction of hierarchical porous carbon with ultrahigh specific surface area and rich heteroatoms toward high-performance supercapacitors

Enhanced Specific Capacitance by a New Dual Redox-Active Electrolyte in Activated Carbon-Based Supercapacitors

Nitrogen-doped Hollow Activated Carbon Nanofibers As High Performance Supercapacitor Electrodes

Nitrogen and Sulfur Codoped Porous Carbon Directly Derived from Potassium Citrate and Thiourea for High-Performance Supercapacitors.

Sol-gel Process-Derived Rich Nitrogen-Doped Porous Carbon Through KOH Activation for Supercapacitors

Thiocyanogen-modulated N, S Co-doped lignin hierarchical porous carbons for high-performance aqueous supercapacitors

Nitrogen and sulfur co-doped activated carbon nanosheets for high-performance coin cell supercapacitor device with outstanding cycle stability

Nitrogen-enriched hierarchical porous carbon with enhanced performance in supercapacitors and lithium-sulfur batteries

Hierarchically Porous Carbon Derived from an Aqueous Curable Composition for Supercapacitors