Abstract:This paper presents the influence of Aluminum Nitride (AlN) nanoparticles on the electrical and material properties of epoxy resin (EP). The EP/AlN nanocomposites with different concentrations of nano-AlN fillers are prepared. The dispersion of the nano-AlN particles in the composites is analyzed by a field emission scanning electron microscope (FESEM). The electrical properties are investigated by the space charge and DC conductivity measurements, whereas the material properties are studied by Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), respectively. The results show that the homo-charge accumulation appears near both electrodes during the polarization, but there are limited negative charges left near both electrodes in the depolarization for the pure EP sample. There is no space charge accumulation in the 1 wt% and 2 wt% EP/AlN nanocomposites. The electric field distortion of the pure EP sample is 20%. Moreover, the electric field distortion initially decreases with the increase of the nano-AlN content, but it increases for the 2 wt% nano-AlN sample. Temperature has a dominant influence on the DC conductivity of the EP/AlN nanocomposites comparing to the pure EP. However, the DC conductivity of the nanocomposites becomes stable at high temperatures. It is also found that the weight loss of the samples decreases with the addition of the nano-AlN and the 1 wt% nano-AlN sample has the highest glass transition temperature. It is elucidated that the high apparent mobility and activation energy facilitate the space charge transport and suppressing the space charge accumulation. Furthermore, the nano-AlN filler can increase the trap level and trap energy density of the deep traps in the sample. The dielectric loss of the EP at high frequency is reduced with the content of 1 wt% nano-AlN. Furthermore, the addition of the nano-AlN can improve the thermal stability of the EP. The 1 wt% nano-AlN sample has the superior electrical insulation and material performance amongst the tested materials.

Curing Behavior and Rheology Properties of Alkyl‐imidazolium‐treated Rectorite/epoxy Nanocomposites

Poly(methyl Methacrylate)-Decorated Single Wall Carbon Nanotube/epoxy Nanocomposites with Re-Agglomeration Networks: Rheology and Viscoelastic Damping Performance

Cure Kinetics of an Epoxy Resin Containing Naphthyl/dicyclopentadiene Moieties and Bis‐phenoxy (3‐hydroxy) Phosphine Oxide System and Properties of Its Cured Polymer

Improvement of Electrical and Material Properties of Epoxy Resin/aluminum Nitride Nanocomposites for Packaging Materials

Viscoelastic Damping Performance And Rheological Behaviour Of Cup-Stacked Carbon Nanotube Modified Epdxy Nanocomposites With Re-Agglomeration Network

Effect of Clay Surfactant Type and Clay Content on the Rheology and Morphology of Uncured Fluoroelastomer/clay Nanocomposites Prepared by Melt‐mixing

Curing behavior, mechanical and thermal properties of epoxy‐CeO 2 nanocomposites

Construction of [P4442]2[IDA]/Zirconium Metal‐Organic Framework (UiO‐66) for Curing with Epoxy Resin

Preparation and analysis of a flexible curing agent for epoxy resin

Synthesis and Characterization of a Novel Curing Agent for Epoxy Resin Based on [Emim][Ac]/Zeolitic Imidazolate Framework Composites

Preparation and characterization of organic rectorite composite gel polymer electrolyte

Cure Kinetics of Epoxy-Based Nanocomposites Analyzed by Avrami Theory of Phase Change

Using Silica Nanoparticles As Curing Reagents for Epoxy Resins to Form Epoxy–silica Nanocomposites

Controllable confinement nano-reinforced organic-inorganic cyanate ester resin with optimal modulus and dielectric properties trade-offs

Curing Kinetics Modeling of Epoxy Modified by Fully Vulcanized Elastomer Nanoparticles Using Rheometry Method

Electronic effects of substituents on the properties of recyclable epoxy resins containing aromatic acetal groups

Hybrid Network Structure And Mechanical Properties Of Rodlike Silicate/Cyanate Ester Nanocomposites

Thermal Conductivity and Orientation Structure of Liquid Crystalline Epoxy Thermosets Prepared by Latent Curing Catalyst

Study curing of epoxy resin by Isophoronediamine/ Triethylenetetramine and reinforced with montmorillonite and effect on compressive strength

Dielectric analysis monitoring of thermoset curing with ionic liquids: From modeling to the prediction in the resin transfer molding process

Ionic Liquids Facilitate the Dispersion of Branched Polyethylenimine Grafted ZIF-8 for Reinforced Epoxy Composites