Abstract:Layer-structured Na intercalation compounds such as Na x MO 2 (M=Co, Mn, Cr) have attracted much attention as cathode materials for sodium-ion batteries due to their high volumetric and gravimetric energy densities. Among them, NaCrO 2 with layered rock salt structure is one of the promising cathodes since NaCrO 2 has a desirable flat and smooth charge/discharge voltage plateau. 1 In addition, NaCrO 2 has the highest thermal stability at charged state which makes it a potentially safer cathode material. 2 The NaCrO 2 exhibits a reversible capacity of 110 mAh g -1 with good cycling performance. 3 However, the transition metal oxide (TMO) cathode materials in NIBs undergo severe chemo-mechanical deformations which leads to capacity fade and poor cycling and is the limiting factor of NIBs. The electrochemical characterization and examination of the electrode structure were the primary focus of several investigations. To improve the lifespan and performance of electrode materials for Na-ion batteries, it is vital to comprehend how Na ions impact the chemo-mechanical stability of the electrodes. In this talk, we will discuss the driving forces behind the structural and interfacial deformations on NaCrO 2 cathodes. Digital image correlation measurements were conducted to probe strain evolution in the electrode during cycling. The free-standing composite NaCrO 2 electrode was used for stain measurements in custom-cell assembly. The battery was cycled against Na metal in 1 M NaClO 4 in PC. The first part of the study involves structural and interfacial deformations in the lower voltage range of 2.3 V to 3.5 V where x0.5 in Na x CrO 2 . In the preliminary studies, we observed that the initial insertion of Na ions leads to negative strain evolution (contraction) in the electrode, followed by expansions in the electrode at a higher state of discharge. Similar phenomena are also observed during charge cycles, where extraction of Na results in an initial contraction in the electrode, followed by expansion at a higher state of charge. Understanding the mechanisms behind chemo-mechanical deformations will allow to tune structure & material property for better electrochemical performance. Acknowledgement: This work is supported by National Science Foundation’s (NSF) Faculty Early Career Development (CAREER) Program, 2142726. References: Bo SH, Li X, Toumar AJ, Ceder G. Layered-to-rock-salt transformation in desodiated Na x CrO2 (x 0.4). Chemistry of Materials. 2016 Mar 8;28(5):1419-29. Xia X, Dahn JR. NaCrO2 is a fundamentally safe positive electrode material for sodium-ion batteries with liquid electrolytes. Electrochemical and Solid-State Letters. 2011 Nov 18;15(1): A1. Komaba S, Takei C, Nakayama T, Ogata A, Yabuuchi N. Electrochemical intercalation activity of layered NaCrO2 vs. LiCrO2. Electrochemistry Communications. 2010 Mar 1;12(3):355-8.

Phase Transition Behavior of NaCrO2 During Sodium Extraction Studied by Synchrotron-Based X-ray Diffraction and Absorption Spectroscopy

In Operando Strain Evolution in Sodium Chromium Oxide Cathode for Na-Ion Batteries during Battery Cycling

Layered-to-Rock-Salt Transformation in Desodiated NaCrO2

Sodium Ion Transport Mechanisms in Antiperovskite Electrolytes Na3obr and Na4oi2: an in Situ Neutron Diffraction Study

Unraveling Structural Evolution of Lini0.5mn1.5o4 by in Situ Neutron Diffraction

Rational Design of Moo2−Based Electrodes by Crystal Surface Engineering Control for Ultra-Long Life Sodium Ion Batteries

Enhancing structural stability of NaCrO2 by Nb-substituting for sodium-ion battery

Disorder Dynamics in Battery Nanoparticles During Phase Transitions Revealed by Operando Single-Particle Diffraction

Layered-To-Rock-Salt Transformation in Desodiated Naxcro2 (X 0.4)

O3-Type NaCrO 2 as a Superior Cathode Material for Sodium/Potassium-Ion Batteries Ensured by High Structural Reversibility

Direct Observation of Alternating Octahedral and Prismatic Sodium Layers in O3‐Type Transition Metal Oxides

A High-Performance Layered Cr-Based Cathode for Sodium-Ion Batteries

Probing Electrochemical Strain Generation in Sodium Chromium Oxide (NaCrO2) Cathode in Na-ion Batteries during Charge/Discharge

Crystal Facet Design in Layered Oxide Cathode Enables Low-Temperature Sodium-Ion Batteries

Suppressing O3−O’3 phase transition in NaCrO2 cathode enabling high rate capability for sodium-ion batteries by Sb substitution

Enhancing Structure Stability by Mg/Cr Co‐Doped for High‐Voltage Sodium‐Ion Batteries

Lowering Sodium‐Storage Lattice Strains of Layered Oxide Cathodes by Pushing Charge Transfer on Anions

Mechanical Activation Enhanced Solid-State Synthesis of NaCrO2 Cathode Material

Structural phase transitions and sodium ordering in Na0.5CoO2: a combined electron diffraction and Raman spectroscopy study

Unravelling the Nature of the Intrinsic Complex Structure of Binary-Phase Na-Layered Oxides

One‐step surface‐to‐bulk modification of NaCrO2 cathode for durable sodium ion batteries