Abstract:Single-photon laser ranging is a new generation of lidar which represents the future lidar development trend. It uses the single photon detector as the receiving device. Due to the fact that single-photon detector possesses the ultra-high sensitivity, the single-photon laser ranging is much easier to achieve the high density as well as the high coverage target sampling. However, the existence of the range work error in single-photon laser ranging, resulting from the fluctuation in the number of signal photoelectrons restricts the improvement of the ranging accuracy. In this paper, the range walk error model based on the lidar equation and the statistical property of single-photon detector is established. Then the relation between the range walk error and the number of signal photoelectrons is also derived. The range walk error of single-photon laser ranging is predicted and the corresponding compensation for the original result is obtained, with the derived function and the detection probability model of single-photon laser ranging. The experiment for its proof is also carried out. In the experiment, the number of signal photoelectrons is changed by the different attenuators for the same target and at the same distance. When the attenuator is changed, the pulse width of echo signal changes very little (about 3.2 ns). However, the average number of signal photoelectrons varies between 0.03 counts and 4.3 counts. So the range walk error, resulting from the fluctuation in the number of signal photoelectrons cannot be ignored. For example, when using an attenuation of 1/10 pass rate, the average number of signal photoelectrons is about 4.3 counts and the range walk error is almost 46 cm, which is the main factor of the range error. The reduction of the range walk error is achieved by applying the correction of the range walk error in this paper. After correction, the standard deviation of the range walk error decreases significantly from 15.17 cm to 1.16 cm. The mean absolute error is also reduced from 11.56 cm to 0.99 cm. Generally, the range walk error has an unnegligible influence on the ranging accuracy. The experimental result confirms that the theoretical model is accurate. It also shows that the bigger the number of the received signal photoelectrons, the greater the range walk error is, and the accuracy of single-photon laser ranging is improved by applying the technique proposed in this paper. Briefly, this paper presents the technical method of optimizing the design and evaluating the performance of single-photon laser ranging.

A Correction Method for Range Walk Error in Photon Counting 3D Imaging LIDAR

Range Walk Error Correction Using Prior Modeling in Photon Counting 3d Imaging Lidar

Theoretical Model and Correction Method of Range Walk Error for Single-Photon Laser Ranging

Theoretical Ranging Performance Model and Range Walk Error Correction for Photon-Counting Lidars with Multiple Detectors.

A Correction Method for Range Walk Error in Time-Correlated Single-Photon Counting Using Photomultiplier Tube

Theoretical Ranging Performance Model That Considers Laser Pointing Errors for Laser Ranging Systems in Detecting Diffusely Reflecting Targets

A Reconstruction Method for Restraining Range Walk Error in Photon Counting Lidar Via Dual Detection

Error Correction Of Laser Scanning System For Reverse Engineering

A Method of Range Walk Error Correction in SiPM LiDAR with Photon Threshold Detection

Profile Extraction of Structural Light Image and Its Correction Based on Light Intensity

Signal restoration method for restraining the range walk error of Geiger-mode avalanche photodiode lidar in acquiring a merged three-dimensional image

Range Walk Error Correction and Modeling on Pseudo-random Photon Counting System

Full-waveform Fast Correction Method for Photon Counting Lidar

Research of Distance-Intensity Imaging Algorithm for Pulsed LiDAR Based on Pulse Width Correction

A Method for Maintaining the Stability of Range Walk Error in Photon Counting Lidar with Probability Distribution Regulator

A Real-Time Restraint Method for Range Walk Error in 3-D Imaging Lidar Via Dual Detection

Restraint of Range Walk Error in a Geiger-mode Avalanche Photodiode Lidar to Acquire High-Precision Depth and Intensity Information.

A Study of Correction to the Point Cloud Distortion Based on MEMS LiDAR System

A Double Threshold Correction Method for Walk Error in Pulsed Laser Ranging System

Point Cloud Intensity Correction for 2D LiDAR Mobile Laser Scanning