Abstract:Quasi-one-dimensional (1D) titania nanobundles were synthesized via a hydrothermal method and used to print random network nanostructured films. These films are shown to be ideally suited for application as photoanodes in dye-sensitized solar cells (DSCs) as they have a higher porosity compared to the traditional 1D nanostructured TiO2 materials. Devices constructed using the N719 dye and iodide/triiodide as the redox mediator in the electrolyte yielded energy conversion efficiencies (η = 6.1 ± 0.2%), which were marginally lower than for devices made with the commonly used P25 titania films (η = 6.3 ± 0.1%) under one sun simulated solar radiation. Application of an electrolyte based on the [Co(bpy)3](2+/3+) redox couple and the MK2 organic sensitizer resulted in higher efficiencies (η = 7.70 ± 0.1%) than for the P25 devices (η = 6.3 ± 0.3%). Each performance parameter (short circuit current density, open circuit voltage and fill factor) was higher for the TiO2 nanobundle devices than those for the P25-based devices. The results of electrochemical impedance spectroscopy (EIS), intensity-modulated photovoltage spectroscopy (IMVS), and dye-loading measurements indicated that the better performance of TiO2 nanobundle devices with cobalt electrolytes correlates with higher porosity, relatively fast electron transport and more efficient suppression of electron recombination. A faster rate of diffusion of the cobalt complexes through the highly porous TiO2 nanobundle network is proposed to contribute to the enhanced device efficiency.

Elementary photoelectronic processes at a porphyrin dye/single-walled TiO2 nanotube hetero-interface in dye-sensitized solar cells: a first-principles study.

CdS/ZnS Co-Sensitized Hierarchical TiO2Nanotree Array with Rutile/Anatase Junctions for Enhanced Photoelectrochemical Performance

Construction of TiO2 NP@TiO2 NT Double-Layered Structural Photoanode to Enhance Photovoltaic Performance of CdSe/CdS Quantum Dots Sensitized Solar Cells

Hierarchical Submicroflowers Assembled from Ultrathin Anatase TiO2 Nanosheets As Light Scattering Centers in TiO2 Photoanodes for Dye-Sensitized Solar Cells

Enhanced photovoltaic performance of dye-sensitized solar cells using a new photoelectrode material: upconversion YbF3-Ho/TiO2 nanoheterostructures

Photo-assisted Deposition of Ag Nanoparticles on Branched TiO2 Nanorod Arrays for Dye-Sensitized Solar Cells with Enhanced Efficiency

Sandwich-like singled-walled titania nanotube as a novel semiconductor electrode for quantum dot-sensitized solar cells

First-Principles Investigation on Electronic Properties of Quantum Dot-Sensitized Solar Cells Based on Anatase Tio2 Nanotubes

A novel approach to titania nanowire arrays as photoanodes of back-illuminated dye-sensitized solar cells

Anatase TiO2 nanotubes as photoanode for dye-sensitized solar cells.

Inorganic Nanotube/Organic Nanoparticle Hybrids for Enhanced Photoelectrochemical Properties

TiO2 nanotube based dye-sensitized photoanode

Hybrid TiO2–SnO2 Nanotube Arrays for Dye-Sensitized Solar Cells

Open-circuit voltage improvement by using TiO2 nanotubes as a working electrode of dye-sensitized solar cell

Ultrathin SnO2 Scaffolds for TiO2-based Heterojunction Photoanodes in Dye-Sensitized Solar Cells: Oriented Charge Transport and Improved Light Scattering.

Conveniently Fabricated Heterojunction Zno/Tio2 Electrodes Using Tio2 Nanotube Arrays for Dye-Sensitized Solar Cells

Electron Transport in Dye-Sensitized Solar Cells Based on Tio2 Nanowires

Enhanced Electron Collection in Photoanode Based on Ultrafine TiO2 Nanotubes by a Rapid Anodization Process

Enhanced Photoelectrochemical Performance by Synthesizing CdS Decorated Reduced TiO2nanotube Arrays

Titania Nanobundle Networks As Dye-Sensitized Solar Cell Photoanodes.

Invited) Doped Titania Oxide Nanotubes for Photoelectochemical Water Splitting