Abstract:Displacement and strain, two of the most important physical quantities in experimental solid mechanics, are seldomly measured simultaneously in a single experimental configuration. In order to provide and improve corresponding sensing techniques, an experimental setup system for simultaneous measurement of dynamic displacement and strain on a flexible cantilever beam using two fiber Bragg gratings (FBGs) in a single fiber is proposed. To realize high-speed multiplexing and demodulation, a configuration incorporating a coarse wavelength-division multiplexing (CWDM) technique and an FBG transmission filter is implemented. The cantilever beam is subjected to steel-ball impact from which the dynamic multipoint displacement/strain sensing performances of the CWDM and FBG filter-based sensing system are demonstrated. Experimental results in temporal and frequency domain are compared with those obtained by the finite element method (FEM) predictions based on identification of the impact-loading history. A noncontact Fotonic displacement sensor and a polyvinylidene-fluoride film (PVDF) strain sensor are also used for comparison. With transient and resonant frequency simulations conducted by the FEM, loading effects of the sensing system are examined. The results obtained in this study indicate that the proposed CWDM and FBG filter-based sensing system is capable of performing simultaneous multipoint displacement/strain measurements in a single fiber with large bandwidth, high sensitivity, and low intensity loss.

Simultaneous measurement of absolute strain and differential strain based on fiber Bragg grating Fabry-Perot sensor

Simulation and Reconstruction for Nonuniform Strain Profile of Fiber Bragg Grating Sensor

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Air Gap Fiber Bragg Grating for Simultaneous Strain and Temperature Measurement

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Simultaneous Independent Temperature and Strain Measurement Using One Fiber Bragg Grating Based on the Etching Technique

Dynamic strain measurement using two wavelength-matched fiber Bragg grating sensors interrogated by a cascaded long-period fiber grating

Simultaneous Measurement of Pressure and Temperature Using a Single Fiber Bragg Grating

A Method of Strain Measurement Based on Fiber Bragg Grating Sensors

An optimized strain demodulation method based on dynamic double matched fiber Bragg grating filtering

A High-Resolution Demodulation Algorithm for FBG-FP Static-Strain Sensors Based on the Hilbert Transform and Cross Third-Order Cumulant

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

Simultaneous Strain and Temperature Measurements with Fiber Bragg Grating Written in Novel Hi-Bi Optical Fiber

Simultaneous Measurement of Temperature and Strain Based on Fiber Loop Mirror Combined with Fiber Bragg Grating

Strain and Temperature Discrimination by Using Temperature-Independent FPI and FBG

Simultaneous Measurement of Temperature and Strain Based on Compact Parallel Core–Cladding FBGs Inscribed by Femtosecond Laser Point-by-Point Method

Simultaneous measurement of dynamic displacement and strain in a single fiber using coarse wavelength-division multiplexing and fiber Bragg-grating filter-based sensing system

Simultaneous strain and temperature measurement by cascading few-mode fiber and single-mode fiber long-period fiber gratings

High-speed Quasi-Distributed Strain Sensing Based on Time Division Multiplexing of Fibre Bragg Gratings

Static Pure Strain Sensing Using Dual-Comb Spectroscopy with FBG Sensors.

Fiber Bragg Grating Dynamic Demodulation Based on Non-Equilibrium Interferometry