Abstract:The optimum chromatographic separation conditions, polyatomic ions interference correction, and extraction parameters were investigated for simultaneous extraction and quantification of As(III), dimethylarsinic acid (DMA), monomethylarsonic acid (MMA), As(V) and Cr(VI) with excellent resolution. The ammonium salts (NH4H2PO4 and NH4NO3) were examined as mobile phases at different pH values by altering the composition during the chromatographic run in gradient elution mode using high-performance liquid chromatography – inductively coupled plasma – mass spectrometry (HPLC-ICP-MS). The 10 mM and 70 mM NH4NO3 composition at pH 8.7 enabled sufficient baseline separation of the target As and Cr species at a total run time of 18 minutes. The identified polyatomic ion interferences were corrected by an inter-element method using mathematical equations. The optimum extraction conditions containing a mixture of 0.375 M (NH4)2HPO4 and 50 mM EDTA at neutral pH as an extraction buffer, extraction temperature of 150 °C and volume of 15 mL were attained by a factorial design technique. The lowest concentrations of the selected elemental species that can be reliably detected by the procedure were in the range from 0.064 to 0.682 ng g−1. The accuracy of the developed procedure was demonstrated by achieving percentage recoveries of 96.8% for As(V) and 97.7% for Cr(VI) using San Joaquin Soil standard reference material 2709a. Proposed method was validated by achieving percentage recoveries from 84.9 to 104% for As species and Cr(VI) using spiking and recovery studies at 3x and 25x the limit of quantification values of the target species. The selected As and Cr species in real sediment were monitored using the optimized analytical method. The differences in concentrations of Cr(VI), As(III), MMA and As(V) between the seasonal state of the river were statistically significant (p ˂0.05) at a 95% confidence level as determined by analysis of variance (ANOVA).

Magnetic Solid-Phase Extraction Combined With Graphite Furnace Atomic Absorption Spectrometry For Speciation Of Cr(Iii) And Cr(Vi) In Environmental Waters

Flow Injection Microfluidic Device with On-Line Fluorescent Derivatization for the Determination of Cr(III) and Cr(VI) in Water Samples after Solid Phase Extraction.

Synthesis of Surface Cr (Vi)-Imprinted Magnetic Nanoparticles for Selective Dispersive Solid-Phase Extraction and Determination of Cr (VI) in Water Samples

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Speciation of Chromium by Magnetic Solid Phase Microextraction Using an Activated Charcoal-Molybdenum (IV) Selenide-Magnetite Composite with Flame Atomic Absorption Spectrometric (FAAS) Detection

[Separation of Cr( VI) and Organic Cr(III) in Natural Water by Weak Basic Anion Exchange Resin and Determination by ICP-AES].

Chemically modified silica gel with p-dimethylaminobenzaldehyde for selective solid-phase extraction and preconcentration of Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) by ICP-OES

Speciation of dissolved Fe(II) and Fe(III) in environmental water samples by micro-column packed with N-benzoyl-N-phenylhydroxylamine loaded on microcrystalline naphthalene and determination by electrothermal vaporization inductively coupled plasma-optical emission spectrometry

Cloud point extraction for high-performance liquid chromatographic speciation of Cr(III) and Cr(VI) in aqueous solutions.

Octyl coated cobalt-ferrite/silica core-shell nanoparticles for ultrasonic assisted-magnetic solid-phase extraction and speciation of trace amount of chromium in water samples

Selective solid phase extraction of trace Sc(III) from environmental samples using silica gel modified with 4-(2-morinyldiazenyl)-N-(3-(trimethylsilyl)propyl)benzamide.

Silica Gel-Immobilized-Vanillin Derivatives As Selective Solid-Phase Extractants for Determination of Chromium (iii) in Environmental Samples by Icp-Oes

Selective Solid-Phase Extraction of Trace Fe(Iii) from Biological and Natural Water Samples Using Nanometer Sio2 Modified with Acetylsalicylic Acid

Study on Speciation Analysis of Cr(Ⅲ) & (Ⅵ) in Environmental Samples by High Performance Liquid Chromatography Coupled with Inductively Coupled Plasma Mass Spectrometry

Synchronous Extraction and Quantitative Speciation of Arsenic and Chromium in Sediments by High-Performance Liquid Chromatography – Inductively Coupled Plasma – Mass Spectrometry (HPLC-ICP-MS)

Speciation of As(III) and As(V) in Food by Magnetic Dispersive Microsolid Phase Extraction with Dispersive Liquid–Liquid Microextraction with Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Detection

Determination Of Chromium(Iii) And Total Chromium In Natural Waters Using A Surface Ion-Imprinted Silica Gel As Selective Adsorbent

Solid-phase Extraction of Trace Cu(II) Fe(III) and Zn(II) with Silica Gel Modified with Curcumin from Biological and Natural Water Samples by ICP-OES

A MWCNTs@CuAl2O4@SiO2 Nanocomposite for the Speciation of Cr(III), Cr(VI), and Total Chromium Prior to High-Resolution Continuum Source Flame Atomic Absorption Spectrometric Determination

Optimization of species stability and interconversion during the complexing reaction for chromium speciation by high-performance liquid chromatography with inductively coupled plasma mass spectrometry.

Separation and preconcentration system based on ultrasonic probe-assisted ionic liquid dispersive liquid-liquid microextraction for determination trace amount of chromium(VI) by electrothermal atomic absorption spectrometry