Abstract:The blends of poly(1,3‐trimethylene carbonate‐b‐(l‐lactide‐ran‐glycolide)) (PTLG) with poly(d‐lactide) (PDLA) were prepared via solution‐casting method using CH2Cl2 as solvent. The poly(l‐lactide) (PLLA) segments of PTLG with PDLA chain constructed as stereocomplex structures and growth stereocomplex crystals of PLA (sc‐PLA). The effects of sc‐PLA crystals on thermal behavior, mechanical properties, thermal decomposition of the PTLG/PDLA blends were investigated, respectively. The differential scanning calorimetry (DSC) and wide‐angle X‐ray diffraction (WAXD) results showed that the total crystallinity of the PTLG/PDLA blends was increased with the PDLA content increasing. Heterogeneous nucleation of sc‐PLA crystals induced crystallization of the PLLA segments in PTLG. The crystallization temperature of samples shifted to 107.5°C for the PTLG/PDLA‐20 blends compared with that of the PTLG matrix, and decreased the half‐time of crystallization. The mechanical measurement results indicated that the tensile strength of the PTLG/PDLA blends was improved from 21.1 MPa of the PTLG matrix to 39.5 MPa of PTLG/PDLA‐20 blends. The results of kinetics of thermal decomposition of the PTLG/PDLA blends by TGA showed that the apparent activation energy of the PTLG/PDLA blends was increased from 59.1 to 72.1 kJ/mol with the increasing of the PDLA content from 3 wt% to 20 wt%, which indicated the enhancement of thermal stability of the PTLG/PDLA blends by addition of PDLA. Furthermore, the biocompatibility of the PTLG/PDLA blends cultured with human adipose‐derived stem cells was evaluated by CCK‐8 and live/dead staining. The experiment results proved the PTLG/PDLA blends were a kind of biomaterial with excellent physical performances with very low cytotoxicity.

Effect of Miscibility on Spherulitic Growth Rate for Double-Layer Polymer Films

Blending Effects on Polymorphic Crystallization of Poly(l-lactide)

Competing Stereocomplexation and Homocrystallization of Poly(l-lactic Acid)/poly(d-Lactic Acid) Racemic Mixture: Effects of Miscible Blending with Other Polymers

Fractionated Crystallization Kinetics and Polymorphic Homocrystalline Structure of Poly(L-lactic Acid)/poly(d-Lactic Acid) Blends: Effect of Blend Ratio

Significantly Accelerated Spherulitic Growth Rates for Semicrystalline Polymers Through the Layer-By-Layer Film Method

Increased Spherulitic Growth Rates of Semicrystalline Polymer Due to Enhanced Limited Local Chain Segmental Mobility at the Interface of Double-Layer Thin Films

Strong Enhancements of Nucleation and Spherulitic Growth Rates Through Amplified Interfacial Effects for Immiscible Linear Polymer/Comb-Like Copolymer Double-Layer Films

Speeding of Spherulitic Growth Rate at the Late Stage of Isothermal Crystallization Due to Interfacial Diffusion for Double-Layer Semicrystalline Polymer Films

Significant Enhancement of Crystallization Kinetics of Polylactide in Its Immiscible Blends Through an Interfacial Effect from Comb-Like Grafted Side Chains

Disclosing the Formation of Ring-Banded Spherulites for Semicrystalline Polymers Through the Double-Layer Film Method

Two-Stage Crystallization Kinetics and Morphological Evolution with Stereocomplex Crystallite-Induced Enhancement for Long-Chain Branched Polylactide/Poly(D-lactic Acid) Blends

Effects of molecular weight on stereocomplex and crystallization of PLLA/PDLA blends

The Effect of Polyethylene Glycol on the Non-Isothermal Crystallization of Poly(L-lactide) and Poly(D-lactide) Blends

Preparation and characterization of polyethylene glycol/poly(L-lactic acid) blends

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Effect of Molecular Weight on Spherulitic Growth Rate of Poly(ϵ‐caprolactone) and Poly(ϵ‐caprolactone)‐b‐poly(ethylene Glycol)

Effect of 1,2,3-triazolium-functionalized PEG-b-PCL block copolymer on crystallization behavior of poly(L‐lactic acid) as nucleation agent and mobility promoter

Stereocomplex Crystallite-Assisted, Shear-Induced Crystallization Kinetics at A High Temperature for Asymmetric Biodegradable Plla/Pdla Blends

Synergistic Effects of Polyethylene Glycol and Cellulose Nanofibers on the Isothermal and Non-isothermal Crystallization Behaviors of Polylactide

Enhancing Crystallization Behavior for Optimized Performances of Poly(tmc‐b‐(lla‐ran‐ga)) by PDLA/PLLA Stereocomplex Crystallization

Can Spherulitic Growth Rate Accelerate Before Impingement for a Semicrystalline Polymer During the Isothermal Crystallization Process?