Abstract:Thermal management has become one of the critical problems in high-power laser systems. The laser crystal, which dissipates a heat flux over 150 W/cm2, is the most challenging component when solving the thermal problem. In this work, a specialized central-jetting microchannel heat sink (MCHS) is proposed purposely for a small-size laser crystal with high heat fluxes. Considering the space constraint and installation restriction, the MCHS has a narrow width to fit with the laser crystal, while its length is extended to enhance the heat dissipation capability. The MCHS is integrated by welding the two layers completely through a vacuum brazing method. Central-jetting impingement is introduced to enhance the cooling efficiency. Coolant is flushed vertically into the microchannel layer toward the central heating region where the heating source is attached at the central bottom of the MCHS. We conduct a parametric study on the thermal performance of the MCHS by experiments. The overall heat transfer coefficient of the MCHS achieves 50 × 103 W/(m2•K), and the average heat transfer coefficient of the microchannel reaches 21.5 × 103 W/(m2•K). The surface temperature of the heating head is controlled below 65 °C, and the temperature variation is less than 5 °C. In the solid bottom of the MCHS, thermal resistance in vertical direction is over 1.8 times of that in the horizontal direction, ensuring an efficient heat dissipation in the extended volume. The local heat transfer characteristics are further examined through additional numerical simulations. The wall temperature of the microchannel and the local heat transfer coefficient have a high plateau in the heating region, and then drop significantly along the flow direction. Due to heat transfer enhancement by jet impingement, the heat transfer coefficient in the central region is generally 15% higher than that averaged on the full microchannel.

A novel laser gain medium: Micro-sphere array cooled by refractive index-matched coolant

Proposed Liquid-Cooled Nanowire Lasers

Tunable Laser Based On Composite Microchip Using Nd:Plzt As Both Tuning And Gain Medium

11-Watt Single-Frequency 1342-Nm Laser Based on Multi-Segmented Nd:YVO 4 Crystal

Numerical Research on Microchannel Cooling Structure of High Power Solid-State Lasers

3Kw Liquid-Cooled Elastically-Supported Nd:YAG Multi-Slab CW Laser Resonator.

Fully immersed liquid cooling thin-disk oscillator

Wavelength-stable 1.1 kW diode laser array cooled by liquid metal

A Novel Solid State Dye Laser Gain Medium With Sandwich Structure

Thermal performance of a laser-diode end-pumped Nd:YVO 4 slab crystal cooled by a pair of microchannel heat sinks

A novel compact side-pumped bonded slab microchip laser

Thermal analysis of the neodymium-doped microspheres array lasers

Enhanced Tuning Performance of In-Series REC-DFB Laser Array

Large-aperture End-Pumped Nd:YAG Thin-Disk Laser Directly Cooled by Liquid

Micro-structured lateral thermal lens for increased output power and narrowed beam divergence in kilowatt-class 9xx nm diode laser bars

Advancing mid-infrared microdisk laser emission with Tm:YAG

Microlaser Output from Rare‐Earth Ion‐Doped Nanocrystal‐in‐Glass Microcavities

Thermal-Induced Refractive-Index Planar Waveguide Laser

Direct-liquid-cooled Nd:YAG thin disk laser oscillator

Thermal performance of a central-jetting microchannel heat sink designed for a high-power laser crystal

A Neodymium Fluid Laser: Laser Emission in Circulating State