Abstract:To improve ablation resistance of ZrC modified C/C composites fabricated by precursor infiltration and pyrolysis process, a multilayer coating with ZrCSiC outer layer and SiC inner layer was prepared on the composites by supersonic atmosphere plasma spraying combined with pack cementation. The bonding strength and ablation property of the coated composites were studied by tensile adhesive method and oxyacetylene flame, respectively. The results showed that the bonding strength of the coating was greater than 10.65 MPa as the fracture occurred in the ZrC modified C/C composites. After ablation for 120 s, the linear and mass ablation rates of the composites were 0.28 × 10−3 mm/s and 0.01 × 10−4 g/s, respectively. The evolution of the coating during ablation was as follows: ZrO2SiO2 binary eutectic, melted ZrO2 layer, grainy ZrO2 connected by ZrO2SiO2 eutectic, dense sintering ZrO2 scale, and forming glass-like SiO2 after sintering ZrO2 failure. The outer ZrCSiC layer could provide protection to the modified composites for 60s under oxyacetylene flame, and the inner SiC coating can continue to protect the composites by forming SiO2 glass-like coating for another 60s.

ZrB2-SiC coating to protect carbon/carbon composites against ablation

A Multilayer SiC/ZrB2/SiC Ablation Resistance Coating for Carbon/Carbon Composites

SiC/ZrB2–SiC–ZrC Multilayer Coating for Carbon/carbon Composites Against Ablation

Ablation Behaviors and Mechanism of ZrC-SiC-Si/SiC-Si Double-Layered Coatings on C/C Composite under Plasma Flame at 3000 °C

A ZrCSiC/SiC multilayer anti-ablation coating for ZrC modified C/C composites

Ablation Resistance of SiC–ZrC Coating Prepared by a Simple Two-Step Method on Carbon Fiber Reinforced Composites

Preparation and ablation properties of ZrC-SiC coating for carbon/carbon composites by solid phase infiltration

SiC Nanowire Toughened ZrB2–SiC Ablative Coating for SiC Coated C/C Composites

Ablation Behavior of ZrB 2 -Based Coating Prepared by Supersonic Plasma Spraying for SiC-Coated C/C Composites under Oxyacetylene Torch

Microstructure and Ablation Mechanism of SiC-ZrC-Al2O3 Coating for SiC Coated C/C Composites under Oxyacetylene Torch Test

Ablation Resistance of ZrB2–SiC Coating Prepared by Supersonic Atmosphere Plasma Spraying for SiC-coated Carbon/carbon Composites

Ablation resistance and mechanism of SiC/ZrC-ZrB2 double layer coating for C/C composites under plasma flame

Ablation behavior of ZrB 2 –SiC protective coating for carbon/carbon composites

Ablation Resistance and Mechanism of SiC/ZrC-ZrB2double Layer Coating for C/C Composites under Plasma Flame

Microstructures and Ablation Resistance of Zrc Coating for Sic-Coated Carbon/Carbon Composites Prepared by Supersonic Plasma Spraying

Fabrication and ablation property of carbon/carbon composites with novel SiC–ZrB2 coating

Ablation Resistance of Different Coating Structures for C/ZrB2–SiC Composites under Oxyacetylene Torch Flame

Long-life ablation resistance ZrB<sub>2</sub>-SiC-TiSi<sub>2</sub> ceramic coating for SiC coated C/C composites under oxidizing environments up to 2200 K

Microstructure and Ablation Performance of SiC–ZrC Coated C/C Composites Prepared by Reactive Melt Infiltration

Effect of SiC coating on ablation resistance of C/C composites under oxyacetylene torch flame

Effect of CVD ZrB2 Coating Thickness on Anti-Ablation Performance of C/SiC Composites