Abstract:ABSTRACTThermally induced phase separation (TIPS) has been developed to prepare porous membranes. The porous structures are mainly dependent on diluents adopted in the TIPS process. We obtained two typical morphologies of poly(vinylidene fluoride) (PVDF) membranes using cyclohexanone (CO) and propylene carbonate (PC) as diluents, respectively. SEM observation displays that porous spherulites are formed from PVDF/CO system, whereas smooth particles result from PVDF/PC system. The TIPS processes of these two systems have been investigated in detail by optical microscope observation and temperature‐dependent FTIR combined with two‐dimensional infrared correlation analysis. Rapid crystallization of PVDF can be seen around 110 °C in the PVDF/CO system, which is consistent with the results of temperature‐dependent FTIR spectra. The spectral evolution indicates a transform of PVDF from amorphous to α‐phase after 110 °C. The νs(CO) band at 1712 cm−1 narrows and the νs(CF) band at 1188 cm−1 shifts to 1192 cm−1 before crystallization, which implies the destruction of interaction between PVDF and CO. In contrast, the PVDF/PC system shows slow crystallization with all‐trans conformation assigned to β‐phase and γ‐phase below 60 °C but no obvious change of polymer−diluent interaction. We propose two mechanisms for the different phase behaviors of PVDF/CO and PVDF/PC systems: a solid−liquid phase separation after destruction of polymer−diluent interaction in the former, and a liquid−liquid phase separation process coupled with rich‐phase crystallization in the later. This work may provide new insight into the relationship among morphologies, crystal forms, and phase separation processes, which will be helpful to adjust membrane structure. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1438–1447

Effect of Annealing Conditions on Crystallization Behavior and Mechanical Properties of NIPS Poly(vinylidene Fluoride) Hollow Fiber Membranes

Structure formation and characterization of PVDF hollow fiber membranes by melt-spinning and stretching method

Polymorphism in Porous Poly(vinylidene Fluoride) Membranes Formed Via Immersion Precipitation Process

Effect Of Preparation Methods On Crystallization Behavior And Tensile Strength Of Poly(Vinylidene Fluoride) Membranes

Annealing of supporting layer to develop nanofiltration membrane with high thermal stability and ion selectivity

Effect of Polymer Dissolution Temperature and Conditioning Time on the Morphological and Physicochemical Characteristics of Poly(Vinylidene Fluoride) Membranes Prepared by Non-Solvent Induced Phase Separation

Effects of Room Temperature Stretching and Annealing on the Crystallization Behavior and Performance of Polyvinylidene Fluoride Hollow Fiber Membranes

Effect of Preparation Conditions on the Morphology, Polymorphism and Mechanical Properties of Polyvinylidene Fluoride Membranes Formed Via Thermally Induced Phase Separation

Morphology and Formation Mechanism of Poly(Vinylidene Fluoride) Membranes Prepared with Immerse Precipitation: Effect of Dissolving Temperature

Formation Mechanism and Crystallization of Poly(vinylidene Fluoride) Membrane Via Immersion Precipitation Method

Preparation and properties of poly (vinylidene fluoride) membranes via the low temperature thermally induced phase separation method

Pore Size Tailoring from Ultrafiltration to Nanofiltration with PVC-g-PDMA Via Rapid Immersion Thermal Annealing

Thermal Annealing on Free Volumes, Crystallinity and Proton Conductivity of Nafion Membranes

Formation of an interconnected lamellar structure in PVDF membranes with nanoparticles addition via solid-liquid thermally induced phase separation

Effect of Tep Content in Cooling Bath on Porous Structure, Crystalline and Mechanical Properties of Pvdf Hollow Fiber Membranes

Effect of the molecular weight and its distribution of polyvinylidene fluoride on the relationship between the spinning process, microstructure and properties of hollow fiber membranes via thermally induced phase separation

Effects of Annealing Stress Field on the Structure and Properties of Polypropylene Hollow Fiber Membranes Made by Stretching

ELEVATED H2/N2 SEPARATION PERFORMANCE BY ANNEALING POST-TREATMENT OF POLYSULFONE HOLLOW FIBER MEMBRANE

Synthesis and Characterization of Poly(N-Isopropylacrylamide)-Graft-Poly(Vinylidene Fluoride) Copolymers and Temperature-Sensitive Membranes

Effect of thermal annealing on gas separation performance and aggregation structures of block polyimide membranes

Thermally Induced Phase Separation of Poly(vinylidene Fluoride)/diluent Systems: Optical Microscope and Infrared Spectroscopy Studies