Abstract:Molybdenum oxide provides high theoretical capacity, but the moderate charge transfer kinetics and cycle life have limited the applications for capacitive energy storage. Herein, the electrochemical performance of molybdenum oxide is modified by tuning the active redox couple through an electrochemical activation process. The activated electrode K-MoOx with a 10 mg cm–2 loading shows excellent pseudocapacitive behavior within the large potential range of −1.2–0 V and delivers 313 F g–1 capacitance at 5 mA cm–2. It also presents an ultrastable cycle life, with a 98% capacitance retention after 10,000 cycles. The activation process involves the insertion of K+ into MoOx, which modifies the Mo electronic structure and introduces Mo4+ sites according to X-ray photoelectron spectroscopy. As a result, the charge storage redox couple shifts from Mo5+/Mo6+ to Mo4+/Mo5+, with the latter delivering higher electrochemical activity due to improved conductivity. Electrochemical impedance spectroscopy also suggests faster ion diffusions and thus higher power capability in K-MoOx, resulting in the enhanced performance. A 2.4 V asymmetric supercapacitor is assembled using K-MoOx as the anode with a MnOx cathode. The work demonstrates a feasible and facile strategy to promote the pseudocapacitive behavior of metal oxide materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13692?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13692</a>.The GCD profiles of the K-MoOx//MnOx ASC device during the first discharge and the following charge–discharge cycle, the HRTEM image of K-MoOx, EDS of the K-MoOx electrode, XPS survey spectra of K-MoOx before and after 10 nm etching, EDS of the MoOx electrode at the ∼3500th activation cycle and GCD profile compared with K-MoOx, K 2p XPS of K-MoOx, the areal and specific capacitance evolution of the MoOx electrode cycling in the 3 M LiCl or NaCl aqueous electrolyte, N2 adsorption–desorption isotherms of MoOx and K-MoOx at 77 K, electrochemical performance of 3DGS, post-cycling analysis on K-MoOx, the C″ vs frequency plots for MoOx and K-MoOx, the element contents in K-MoOx measured by ICP, and capacitance and cycling stability of the reported molybdenum pseudocapacitive electrodes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13692/suppl_file/am0c13692_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Facile Synthesis of Α-Moo3 Nanobelts and Their Pseudocapacitive Behavior in an Aqueous Li2SO4 Solution

Freestanding MoO 3−x nanobelt/carbon nanotube films for Li-ion intercalation pseudocapacitors

Simple Electrodeposition of MoO3 Film on Carbon Cloth for High-Performance Aqueous Symmetric Supercapacitors

Alpha-Moo3 Nanobelts: A High Performance Cathode Material For Lithium Ion Batteries

In-situ TEM Experiments and First-Principles Studies on the Electrochemical and Mechanical Behaviors of Α-Moo3 in Li-ion Batteries

Ordered mesoporous MoO2 as a high-performance anode material for aqueous supercapacitors

Electrochemical Behavior of Α-Moo 3 Nanobelts As Cathode Material for Lithium Ion Batteries

Ultralong alpha-MoO3 Nanobelts: Synthesis and Effect of Binder Choice on Their Lithium Storage Properties

MoO3 Nanobelts Integrated with Partially-Exfoliated Graphite Paper for High-Performance Supercapacitors

Hydrothermal synthesis of single crystal MoO 3 nanobelts and their electrochemical properties as cathode electrode materials for rechargeable lithium batteries

Surface Tiny Grain-Dependent Enhanced Rate Performance of MoO3 Nanobelts with Pseudocapacitance Contribution for Lithium-Ion Battery Anode

Composite K2Mo4O13/alpha-MoO3 Nanorods: Sonochemical Preparation and Applications for Advanced Li+/Na+ Pseudocapacitance

FACILE SYNTHESIS OF alpha-MoO3/MnO2 COMPOSITE ELECTRODES FOR HIGH PERFORMANCE SUPERCAPACITOR

Hydrothermal Synthesis and Electrochemical Properties of Α-Moo3 Nanobelts Used As Cathode Materials for Li-ion Batteries

HxMoO3@C Nanobelts: Green Synthesis and Superior Lithium Storage Properties

Chemical vapor deposition-based synthesis of binder-free nanostructure α-MoO3 electrode material for PES devices

Ultrasonic Synthesis of Α-Moo3 Nanobelt@CNTs Composite for Lithium Battery and Its Electrochemical Performances

Binder-Free Alpha-Moo3 Nanobelt Electrode For Lithium-Ion Batteries Utilizing Van Der Waals Forces For Film Formation And Connection With Current Collector

Electrodeposition Synthesis of High Performance MoO3-x@Ni-Co Layered Double Hydroxide Hierarchical Nanorod Arrays for Flexible Solid-State Supercapacitors

Coating of Α-Moo3 on Nitrogen-Doped Carbon Nanotubes by Electrodeposition As a High-Performance Cathode Material for Lithium-Ion Batteries

Activating the Highly Reversible Mo 4+ /Mo 5+ Redox Couple in Amorphous Molybdenum Oxide for High-Performance Supercapacitors