Abstract:Molybdenum oxide provides high theoretical capacity, but the moderate charge transfer kinetics and cycle life have limited the applications for capacitive energy storage. Herein, the electrochemical performance of molybdenum oxide is modified by tuning the active redox couple through an electrochemical activation process. The activated electrode K-MoOx with a 10 mg cm–2 loading shows excellent pseudocapacitive behavior within the large potential range of −1.2–0 V and delivers 313 F g–1 capacitance at 5 mA cm–2. It also presents an ultrastable cycle life, with a 98% capacitance retention after 10,000 cycles. The activation process involves the insertion of K+ into MoOx, which modifies the Mo electronic structure and introduces Mo4+ sites according to X-ray photoelectron spectroscopy. As a result, the charge storage redox couple shifts from Mo5+/Mo6+ to Mo4+/Mo5+, with the latter delivering higher electrochemical activity due to improved conductivity. Electrochemical impedance spectroscopy also suggests faster ion diffusions and thus higher power capability in K-MoOx, resulting in the enhanced performance. A 2.4 V asymmetric supercapacitor is assembled using K-MoOx as the anode with a MnOx cathode. The work demonstrates a feasible and facile strategy to promote the pseudocapacitive behavior of metal oxide materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13692?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13692</a>.The GCD profiles of the K-MoOx//MnOx ASC device during the first discharge and the following charge–discharge cycle, the HRTEM image of K-MoOx, EDS of the K-MoOx electrode, XPS survey spectra of K-MoOx before and after 10 nm etching, EDS of the MoOx electrode at the ∼3500th activation cycle and GCD profile compared with K-MoOx, K 2p XPS of K-MoOx, the areal and specific capacitance evolution of the MoOx electrode cycling in the 3 M LiCl or NaCl aqueous electrolyte, N2 adsorption–desorption isotherms of MoOx and K-MoOx at 77 K, electrochemical performance of 3DGS, post-cycling analysis on K-MoOx, the C″ vs frequency plots for MoOx and K-MoOx, the element contents in K-MoOx measured by ICP, and capacitance and cycling stability of the reported molybdenum pseudocapacitive electrodes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13692/suppl_file/am0c13692_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

MoOxthin Films Deposited by Magnetron Sputtering As an Anode for Aqueous Micro-Supercapacitors

Fabrication of Moox Film As A Conductive Anode Material for Micro-Supercapacitors by Electrodeposition and Annealing

Novel [111] Oriented Γ-Mo2n Thin Films Deposited by Magnetron Sputtering As an Anode for Aqueous Micro-Supercapacitors

Sputter Deposited Crystalline MoO 2 Films as a High-Capacity and Stable Electrode Material for Supercapacitors: Mechanistic/Electrochemical Insights

Ordered mesoporous MoO2 as a high-performance anode material for aqueous supercapacitors

Simple Electrodeposition of MoO3 Film on Carbon Cloth for High-Performance Aqueous Symmetric Supercapacitors

Molybdenum oxide film with stable pseudocapacitive property for aqueous micro-scale electrochemical capacitor

Freestanding MoO 3−x nanobelt/carbon nanotube films for Li-ion intercalation pseudocapacitors

Amorphous Porous Molybdenum Dioxide as an Efficient Supercapacitor Electrode Material

Stable α-MoO 3 Electrode with a Widened Electrochemical Potential Window for Aqueous Electrochemical Capacitors

Facile Synthesis of Α-Moo3 Nanobelts and Their Pseudocapacitive Behavior in an Aqueous Li2SO4 Solution

Aqueous supercapacitors of high energy density based on MoO3 nanoplates as anode material.

FACILE SYNTHESIS OF alpha-MoO3/MnO2 COMPOSITE ELECTRODES FOR HIGH PERFORMANCE SUPERCAPACITOR

ZnS/MoS2 Film Grown on Mo Foil As Binder Free Electrode for Supercapacitor

Activating the Highly Reversible Mo 4+ /Mo 5+ Redox Couple in Amorphous Molybdenum Oxide for High-Performance Supercapacitors

MoP-protected Mo Oxide Nanotube Arrays for Long-Term Stable Supercapacitors

One-Step Hydrothermal Synthesis of MoO2/MoS2 Nanocomposites as High-Performance Electrode Material for Supercapacitors.

Direct electrochemical growth of amorphous molybdenum sulfide nanosheets on Ni foam for high-performance supercapacitors

Influence of iron concentration and post-annealing temperature on structure and pseudocapacitive characteristics of a MnO2–Fe2O3 nanocomposite

Influence of Iron Concentration and Post-Annealing Temperature on Structure and Pseudocapacitive Characteristics of a MnO 2 –fe 2 O 3 Nanocomposite

Influence of phase transition with annealing temperature on structural, morphological, and supercapacitive characteristics of molybdenum oxide nanostructures