Abstract:The metallic interconnects are essential components of energy devices such as fuel cells and electrolysis cells, batteries, as well as electronics and optoelectronic devices. In recent years, 3D printing processes have offered complementary routes to the conventional photolithography- and vacuum-based processes for interconnect fabrication. Among these methods, the confined electrodeposition (CED) process has enabled a great control over the microstructure of the printed metal, direct printing of high electrical conductivity (close to the bulk values) metals on flexible substrates without a need to sintering, printing alloys with controlled composition, printing functional metals for various applications including magnetic applications, and for in situ scanning electron microscope (SEM) nanomechanical experiments. However, the metal deposition rate (or the overall printing speed) of this process is reasonably slow because of the chemical nature of the process. Here, we propose using the CED process to print a single layer of a metallic trace as the seed layer for the subsequent selected-area electroless plating. By controlling the activation sites through printing by the CED process, we control, where the metal grows by electroless plating, and demonstrate the fabrication of complex thin-film patterns. Our results show that this combined process improves the processing time by more than 2 orders of magnitude compared to the layer-by-layer printing process by CED. Additionally, we obtained Cu and Ni films with an electrical resistivity as low as ∼1.3 and ∼2 times of the bulk Cu and Ni, respectively, without any thermal annealing. Furthermore, our quantitative experiments show that the obtained films exhibit mechanical properties close to the bulk metals with an excellent adhesion to the substrate. We demonstrate potential applications for radio frequency identification (RFID) tags, for complex printed circuit board patterns, and resistive sensors in a Petri dish for potential biological applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01890?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01890</a>.SEM images of the single-layer printed Cu and Ni lines with a nozzle diameter of ∼250 μm for different nozzle speeds; The optical images of single-layer Cu and Ni lines printed with different nozzle speeds, and the width and thickness of the printed Cu and Ni lines vs the nozzle speed; The FIB-sectioned cross-sectional images of Cu and Ni films; and The schematic of an unpinned (top) and pinned (bottom) indentation-induced buckle (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01890/suppl_file/am1c01890_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Fabrication and electromagnetic properties of soft-core functional particles by way of electroless Ni-Fe-P alloy plating on helical microorganism cells

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Developing A Well-Adhered Ni/P Alloy Film On The Surface Of Silicone Elastomer For Shielding Electromagnetic Interferences

Fabrication of highly conducting nickel-coated graphite composite particles with low Ni content for excellent electromagnetic properties

Influence of Fabrication Process on Magnetic Properties of Co-Finemet Nanocrystalline Powder Core

Unveiling the Structure-Activity Relationship of Hollow Spindle-Like Α-Fe2o3 Nanoparticles Via Phosphorus Doping Engineering for Enhanced Lithium Storage

Fabrication of monodispersed nickel flower-like architectures via a solvent-thermal process and analysis of their magnetic and electromagnetic properties

Comparative Study of Electroless Co-Ni-P Plating on Tencel Fabric by Co 0 -Based and Ni 0 -Based Activation for Electromagnetic Interference Shielding

Customization of FeNi alloy nanosheet arrays inserted with biomass-derived carbon templates for boosted electromagnetic wave absorption

Preparation of Electric and Magnetic Ps@Ni@Cu Core-Shell Microspheres for Anisotropic Conductive Films

Fabrication of Highly Conductive Silver-Coated Aluminum Microspheres Based on Poly(Catechol/Polyamine) Surface Modification

Effect of morphology and microstructure of NiCo nanoparticles on the electromagnetic shielding behavior of flexible and durable NiCo-coated carbon fibers

Fabrication and Electromagnetic Properties of Novel Feni Alloy-Coated Flake Graphite Prepared by Electroless Plating

Preparation and Characterization of Nano-Particles Nickel Hollow Fibers

Fabrication of Energetic Aluminum Core/hydrophobic Shell Nanofibers Via Coaxial Electrospinning

Interconnect Fabrication by Electroless Plating on 3D-Printed Electroplated Patterns

Improved Ferromagnetic Properties of Electrospun NiFe2O4 with Tunable Morphology: from Multiparticle-Chain to Single-Particle-chain

Ni Plating on Carbon Fiber on the Condition of Alkali

Fabrication And Characterization Of Fe-Ni Alloy/Nickel Ferrite Composite Nanofibers By Electrospinning And Partial Reduction

Preparation of polystyrene@Ni@Cu core–shell microspheres by pickering emulsion polymerization and their autonomous motion in a magnetic field applied to anisotropic conductive films

A comparative study of Ni75Fe25 microcomponents fabricated by microelectroforming and micromolding