Abstract:This study explores the influence of chemical composition and cooling rate on the microstructural formation of Al-based alloys, predominantly alloyed with Mn and Ce. Approximately 1 kg of the alloys with varying alloying element content was prepared in a protective resistance furnace. The solidified alloys were then sectioned into 100 g pieces, remelted, and cast into massive copper molds, resulting in samples with different thicknesses ranging from 0.3 to 6 mm. The cooling rates were precisely determined using numerical simulation, ranging from 10 3 to 10 4 K/s. The experimental results demonstrate that, at moderately high cooling rates (above 10 3 K/s), the primary intermetallics precipitated were identified as Al 20 Mn 2 Ce. However, at lower cooling rates, particularly when the Mn and Ce content were high, the formation of the "τ"-phase, Al 8 Mn 4 Ce, was observed and characterized by its detrimental dendrite-like morphology. Interestingly, as the cooling rate approached 10 5 K/s and in the presence of an optimal chemical composition (with sufficiently high Mn and Ce content), an amorphous structure formed at the outer surface of the samples. This amorphous structure exhibits intriguing potential for certain applications due to its unique properties. The desirable microstructure of bulk samples consists of submicron intermetallic compounds embedded in a boundary-free Al-matrix, which is promising for enhancing material strength and performance. This investigation sheds light on the crucial role of chemical composition and cooling rate in controlling the microstructural features of Al-based alloys, thereby providing valuable insights for the development of advanced materials with tailored properties for specific industrial applications. The role of rare earth metals (Ce and La) as poisoning and GFA (glass-forming ability) contributing elements is clarified. The Widmanstätten structure, appeared in the presence of high content of Mn, is discovered.

Growth and Design of Lab6 Microcrystals by Aluminum Melt Reaction Method

Effect of LaB6 on the Microstructure Evolution and Mechanical Properties of Ti-45Al-8Nb Alloy

Microstructure Evolution and Mechanical Properties of LaB6-modified Ti2AlNb Alloy Fabricated by Blended Elemental Powder Metallurgy

Melt-assisted Synthesis to Lanthanum Hexaboride Nanoparticles and Cubes

A solid-state reaction route to prepare LaB6 nanocrystals in vacuum

From Crack-Prone to Crack-Free: Unravelling the Roles of LaB6 in a Β-Solidifying TiAl Alloy Fabricated with Laser Additive Manufacturing

Microstructure control and ductility improvement of La?Al?(Cu,Ni) composites by Bridgman solidification

Microstructure Formation of Al-Based Alloys in the Presence of Rare Earth Metals (Ce, La) and Mn under High Cooling Rate

Controllable 3D Morphology and Growth Mechanism of Quasicrystalline Phase in Directionally Solidified Al–Mn–Be Alloy

Growth and Crystal Orientation Regulation of Aluminum Diboride Films Induced by an Al Template

Mechanical and thermal properties of LaMgAl11O19

Preparation and characterization of LnMgAl11O19 (Ln=La, Nd, Gd) ceramic powders

Enhancing Plasticity in BCC Mg-Li-Al Alloys Through Controlled Precipitation at Grain Boundaries

A Low-Temperature Route for the Synthesis of Nanocrystalline LaB6

Optimization of growth theory of the directionally solidified alumina based eutectic ceramics

On Melt Growth and Microstructure Characterization of Magnesium Bicrystals

Producing laminated NiAl with bimodal distribution of grain size by solid-liquid reaction treatment

Microstructural Evolution, Mechanical and Thermal Properties of LaB6 Embedded in Si-B-C-N Prepared by Spark Plasma Sintering

Faceted-Nonfaceted Growth Transition and 3-D Morphological Evolution of Primary Al6mn Microcrystals in Directionally Solidified Al-3 At.% Mn Alloy

Insights into the structure sustainable evolution and crystallization kinetics of amorphous Mg60Ni30La10 alloy

Uncovering the roles of LaB6-nanoparticle inoculant in the AlSi10Mg alloy fabricated via selective laser melting