Abstract:Composite TlO2-Al2O3 supports were prepared by the sol-gel technique using tetra-n-butyl-titanate and gamma-Al2O3 as raw materials, and the Ni2P/TiO2-Al2O3 catalysts were obtained by incipient wetness impregnation of aqueous metal phosphate precursors, followed by temperature-programmed reduction of inflowing H-2. The supports and catalysts were characterized by X-ray diffraction, infrared spectroscopy, transmission electron microscopy, and N-2 adsorption. The hydrodesulfurization (HDS) activity was examined in a fixed-bed reactor. Experimental results indicate that the composite support can effectively prevent the formation of aluminum phosphates based on the strong interaction between P and gamma-Al2O3, overcome the disadvantage of low surface titania, and improve metal support interaction, which significantly increase catalyst activity and selectivity. The Ni2P/TiO2-Al2O3 Catalyst exhibits good activity for the HDS of 3-methylthiopliene (3-MT), used as a model compound. The activity and stability of the Ni2P/TiO2-Al2O3 catalyst are affected by the phosphorus content, both achieving a maximum with an initial Ni/P molar ratio of 1:2. The reaction temperature and the weight hourly space velocity (WHSV) show significant influence, but the reaction pressure and the volume ratio of hydrogen/oil have little effect oil the HDS performance of the Ni2P/TiO2-Al2O3 catalyst. The conversion of 3-MT is close to 100% when the reaction temperature reaches 603 K, reaction pressure reaches 2.0 MPa, WHSV reaches 1,275 h(-1), and volume ratio of hydrogen/oil reaches 400.

Preparation of Ni2P/γ-Al2O3 catalyst and its dehydrogenation performance

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

The catalytic performance of Ni2P/Al2O3 catalyst in comparison with Ni/Al2O3 catalyst in dehydrogenation of cyclohexane

Preparation, characterization and hydrodesulphurization catalytic performance of Al-Ni2P/SBA-15 catalysts

Ni<sub>2</sub>P Catalysts Supported on Titania-Modified Alumina for the Hydrodesulfurization of Dibenzothiophene

Effect of Ni on the catalytic performance of Pt/γ-Al2 O3 in methylcyclohexane dehydrogenation

A bifunctional Ni3P/γ-Al2O3 catalyst prepared by electroless plating for the hydrodeoxygenation of phenol

Ni 2P catalysts supported on titania-modified alumina for the hydrodesulfurization of dibenzothiophene

Effect of Supports on the Supported Ni2P Catalysts Prepared by the Phosphidation Using Triphenylphosphine in Liquid Phase

Efficient Ni2P /Al2O3 hydrodesulfurization catalysts from surface hybridization of Al2O3 particles with graphite-like carbon

Reprint of: A bifunctional Ni3P/γ-Al2O3 catalyst prepared by electroless plating for the hydrodeoxygenation of phenol

A highly loaded and dispersed Ni2P/SiO2 catalyst for the hydrotreating reactions

Effect of Phosphine Doping and the Surface Metal State of Ni on the Catalytic Performance of Ni/Al2O3 Catalyst

Reprint of: A bifunctional Ni<sub>3</sub>P/-Al<sub>2</sub>O<sub>3</sub> catalyst prepared by electroless plating for the hydrodeoxygenation of phenol

Noble Metal Catalyzed Preparation of Ni2P/α-Al2O3

Preparation of Supported Skeletal Ni Catalyst and Its Catalytic Performance on Dicyclopentadiene Hydrogenation

Preparation of Ni<sub>2</sub>P/TiO<sub>2</sub>−Al<sub>2</sub>O<sub>3</sub>and the Catalytic Performance for Hydrodesulfurization of 3-Methylthiophene

Preparation of Highly Dispersed Nickel Phosphide Catalyst Supported on Nano-Sized Y Zeolite and Its Hydrodesulfurization Performance

Improving Anti-Coking Properties of Ni/Al2O3 Catalysts via Synergistic Effect of Metallic Nickel and Nickel Phosphides in Dry Methane Reforming

Partial Hydrogenation of Cyclopentadiene over Amorphous NiB Alloy on Α-Alumina and Titania‐modified Α-Alumina

Ni-bearing Nanoporous Alumina Loaded Ultralow-Concentrated Pd As Robust Dual Catalyst Toward Hydrogenation and Oxidation Reactions