Abstract:The impact between the flared bow and the wave will cause a serious bow-flared slamming load. Many investigations have been carried out to predict the slamming load that the hull suffers under severe sea states. With the wide use of the hull structure response monitoring system, it will be of great significance to investigate the ship slamming problem if the slamming load can be identified by using the hull structure response monitoring data in the actual navigation environment. This paper integrates the seakeeping method, computational fluid dynamics method and finite element method to systematically simulate the bow-flared slamming pressure and the local structural response of a large container ship. Through comparative analysis of the dynamic response and static response of the bow-flared structure under extreme slamming load, it is found that the dynamic effect of the bow-flared structure is not obvious. Three different static load identification methods are used to identify the simple static load acting on the flared structure of the bow. By comparing the results of different identification methods, it is found that the TRM + L_curve method can realize the most accurate identification of the simple load. Further, the dynamic response process of the bow-flared structure is regarded as a quasi-static process, and the slamming pressure histories acting on the flared region can be identified. In general, the identification results of the bow-flared slamming pressures are in good agreement with the original slamming pressures, which preliminarily verifies the availability of the present method in the indirect monitoring of the bow-flared slamming load of the large container ship.

Numerical simulation of 2-D bow flare slamming using SPH method

CFD-FEM simulation of hydroelastic responses and slamming loads of a bow-flare ship advancing in head regular waves

Potential -Flow and CFD Investigations of Bow-Flare Slamming on a Container Ship in Regular Heading Waves

Sensitivity Analysis of the Effect of Speed and Inclination Angle on Water-Entry Slamming Pressure of the Bow

Experimental and Numerical Prediction of Slamming Impact Loads Considering Fluid–Structure Interactions

Numerical investigations of a 2D bow wedge asymmetric free-falling into still water

The Numerical Simulation of Wave Slamming on an Open-Piled Structure Using the SPH Model

Numerical Study on the Dynamic Response of the Large Containership's Bow Structure under Slamming Pressures

Numerical investigation on the slamming loads of a truncated trimaran hull entering regular waves

Simulation of High-Speed Vessel Waves Based on 2d+t SPH Method

Experimental and Numerical Analysis of Bow Slamming and Whipping in Different Sea States

Research on the bow-flared slamming load identification method of a large container ship

A 3-D SPH Model for Simulating Water Flooding of a Damaged Floating Structure

Numerical simulation of wave flume based on SPH-ALE method

Dynamic Characteristics and Flow Field Evolution of Flat Plate Water Entry Slamming Based on Smoothed Particle Hydrodynamics

Ship hull slamming analysis with nonlinear boundary element method

Analysis of water entry for large flare ship based on model experiment

Experimental investigation on the slamming loads of a truncated 3D stern model entering into water

Symmetrical and asymmetrical water entry of a three-dimensional bow-flared section by a Cartesian grid multiphase flow model with multiple DOF motion

Numerical simulation of regular wave motion by smoothed particle hydrodynamic method

Slamming load and hydroelastic structural response of bow flare areas of aluminium fast displacement crafts