Damage Evaluation of Fracturing Fluids on Sandstone Reservoir with Extra-Low Permeability

何金钢,康毅力,游利军,程秋菊
DOI: https://doi.org/10.19346/j.cnki.1000-4092.2013.02.004
2013-01-01
Abstract:Dealing with the study of Chang-8 oilfield group sandstone reservoir,the damage evaluation of fracturing fluid was discussed, and two experiment evaluations of dynamic damage for fracturing fluid were conducted, including the permeability damage of fracturing fluid filtrate for sample rock, and the dynamic filtration of fracturing gel breaking liquid for the flow back rate measurement of fracture-making rock. At the same time,several related experiment evaluations of static damage for fracturing fluid were finished,such as the compatibility between fracturing fluid and formation fluid or working fluid,the wettability between fracturing fluid and crude oil, the emulsification rate and the residue. The formula of fracturing fluid was 0.4% HPG(guar gum)+ 0.4% AS-6(clay stabilizer)+ 0.3% CX-307(demulsify-cleanup additive)+ 0.1% HCHO(microbicide). The experiment results showed that the emulsifying rates were more than 60% when the volume ratios of oil and gel breaking liquid were of 3:1, 3:2, 1:1, and the emulsion breaking rates were only 12.00%-23.77%. The average content of fracturing fluid residue was of 703 mg/L,and the throat was easily blocked. The flow back recovery rate of fracturing rock was of 1.48%-85.83%, and that was only 0.02%-42.9% when the fractures were supported by proppant. The emulsification damage of basic rock for fracturing fluid was strong with 89.83% average damage rate. The damage of liquid residual was strong with 73.71% average damage rate. The damage of fracturing fluid filtrate was medium-low with 44.85% average damage rate. The wettability of rock reversal from water-wet into oil-wet had been generated by fracturing fluid. The solid-phase invasion,alkali sensitivity and wettability reversal were the main factors of reservoir damage. The damage rate of solid phase intrusion was of 28.86%, that of wettability was of 44.98%, and that of alkali-sensitive for basic rock and fracturing rock was of 26.38% and 32.18%, respectively. It was suggested that using clean fracturing to reduce the damage of residue and choosing appropriate surfactant to improve the flow back rate for the reservoir protection and effective development of Zhenjing oilfield.
What problem does this paper attempt to address?