Abstract:The studies of the elastic behavior in the capillary flow of LDPE/HDPE blend melts were carried out at a test temperature range from 180 to 200 degrees C and at an apparent shear rate of about 25-120 s(-1). The end-pressure drop (Delta P-end) increased nonlinearly with increasing wall shear stress (tau(omega)) and achieved a minimum value at a weight fraction (phi(HD)) of HDPE of 50%. The die-swell ratio (B) increased basically linearly with increasing tau(omega) or Delta P-end and achieved a maximum value at phi(HD) of 50%. With the addition of the die length-diameter ratio, the values of B were decreased linearly. At a low shear rate, the temperature sensitivity of the melt die-swell was more significant than at a high shear rate. With increasing phi(HD), B increased when phi(HD) <50%, then decreased. B reached a maximum value at phi(HD), of 50% and a fixed apparent shear rate. This phenomenon may be explained by using the theory of viscoelastic competition between components of polymer blend melts. Furthermore, the first normal stress difference (N-1) of the sample melts was estimated by using an equation published in a previous work. The results showed that B increased linearly with increasing N-1. (C) 2000 John Wiley & Sons, Inc.

Melt Extrudate Swell Behavior of POM/EVA/HDPE/nano-CaCO3 Composites

Melt flow properties and melt density of POM/EVA/HDPE nanocomposites

Research on Die-swell Behavior During Extrusion of Polyformaldehyde Blends and Composites

Melt Die-Swell Behavior of Polyoxymethylene Blended with Ethylene-Vinyl Acetate Copolymer and High-Density Polyethylene

Flexural and impact properties of POM/EVA/HDPE blends and POM/EVA/HDPE/nano-CaCO 3 composites

Tensile Properties of Polyformaldehyde Blends and Nanocomposites

Flow Properties and Extrudate Swell During Extrusion of Polyformaldehyde Melt

Extrudate Swell Behavior of Polypropylene Composites Filled with Microencapsulated Red Phosphorus

Melt flow behavior in capillary extrusion of nanosized calcium carbonate-filled poly(L -lactic acid) biocomposites

Melt Extrudate Swell Behavior of Polypropylene Composites Filled with Hollow Glass Beads

Melt Density and Flow Property of PDLLA/nano-CaCO3 Bio-Composites

Melt Flow Behavior in Capillary Extrusion of Nanosized Calcium Carbonate Filled PLLA/PCL Bio-Composites

Effects of Extrusion Conditions on Die-Swell Behavior of Polypropylene/diatomite Composite Melts

Capillary Extrusion Rheology and Thermal Stability of Eva/Organomontmorillonite Nanocomposites

Melt flow properties of PDLLA/nano-CaCO_3 composites

The polymer melt swelling behavior in micro-extrusion process for preparation of continuous carbon fiber reinforced PP prepreg filament

Melt Rheology during Extrusion of Polypropylene Composites Filled with Diatomite Particles

Melt extrudate swell behavior of multi‐walled carbon nanotubes filled‐polypropylene composites

Melt Viscoelastic Behavior in Capillary Extrusion of Polypropylene/Epdm/Glass Bead Ternary Composites

Rheological and extrusion behavior of intercalated high-impact polystyrene/organomontmorillonite nanocomposites

Elastic Behavior of Ldpe/Hepe Blend Melts in Capillary Extrusion