Abstract:Abstract The heat storage technology can improve the performance of a solar thermal utilization system effectively. This work studied the effect of phase-change materials (PCMs) on thermal stratification in a heat storage tank. A 60 l sodium acetate trihydrate heat storage tank with 331.15 K phase-change temperature was designed and fabricated. A mathematical model was built to simulate the discharge process in the water tank, and the temperature distribution during the discharge process was obtained. The computational fluid dynamics model was verified by the experimental data. Furthermore, the Ri, the fill efficiency, and the MIX number were adopted to extensively analyze the performance of a heat storage tank with different positions of PCMs with the variation of flow rates. The results indicated that the distance between the isothermal surfaces of 303.15 K and 348.15 K in PCM1, PCM2, PCM3, and PCM4 were 11.75 cm, 11.13 cm, 10.52 cm, and 9.28 cm, respectively, with 9 l/min of flow velocity when t* = 0.7, showing that the thermal stratification was improved as the position of the PCMs got closer to the inlet. The PCMs’ half-life (the liquefaction rate reached 50%) was prolonged as the inlet flow rates increased. As the flow rate increased from 1 l/min to 5 l/min, the half-life of PCM4 delayed from a dimensionless time of 0.5 to a dimensionless time of 0.9. Moreover, when the flow velocity was 9 L/min, the liquefaction rate of PCM4 remained at 1. The calculated values of fill efficiency and Richardson number were higher than the experimental data slightly, while the MIX number was smaller than the experimental results. The experimental and calculated values of root mean square error (RMSE) increased with the increasing inlet flow velocity and the lowering of the positions of the PCMs.

Thermodynamic analysis on optimum phase change temperature for multiple phase change materials

STUDY ON CHARGING AND DISCHARGING RATES OF LATENT HEAT THERMAL ENERGY STORAGE SYSTEMS EMPLOYING MULTIPLE PHASE CHANGE MATERIALS

A New Model of Phase Change Process for Thermal Energy Storage

Studies on performance enhancement of heat storage system with multiple phase change materials

Simulative optimization on energy saving performance of phase change panels with different phase transition temperatures

Phase change material-based thermal energy storage

Experimental and numerical research on thermal characteristics of phase change thermal storage device

Thermal performance characterization of a thermal energy storage tank with various phase change materials

Experimental and numerical investigation of the melting process and heat transfer characteristics of multiple phase change materials

Effects of thermophysical properties on optimal selection of phase change material for a triple tube heat exchanger unit at different time scales

The Thermal Stratification Evaluation of Phase-Change Materials in a Heat Storage Tank: Computational Fluid Dynamics and Experimental Study

Recent advances in phase change materials for thermal energy storage

Exploring the Potential of Phase Change Material for Thermal Energy Storage in Building Envelopes

Optimal Phase Change Temperature for Energy Storage Based on Fluctuating Loads in Building Cooling Heating and Power System

Heat transfer enhancement in thermal energy storage using phase change material by optimal arrangement

Thermal Performance Analysis of Latent Heat Thermal Energy Storage with Cascaded Phase Change Materials Capsules under Varying Inlet Temperature

Phase Change Thermal Storage Materials for Interdisciplinary Applications

Analysis of Melting Dynamics and Parametric Optimization in Encapsulated Phase Change Materials for Thermal Energy Storage

Research Progress on the Phase Change Materials for Cold Thermal Energy Storage

Review on Thermal Conductivity Improvement of Phase Change Materials with Enhanced Additives for Thermal Energy Storage

Study on Phase Change Materials' Heat Transfer Characteristics of Medium Temperature Solar Energy Collection System