Abstract:In this study, we successfully synthesized silicon nanotubes (Si-NTs) and silicon nanowires (Si-NWs) in a controllable manner using a catalyst- and template-free method through the direct electrolysis of SiO 2 in a molten CaCl 2 -CaO system, while also proposing a novel formation mechanism for Si-NTs. Si-NWs are formed through electro-deoxidation when the cell voltage is within the range of CaO decomposition voltage and SiO 2 decomposition voltage. By subsequently adjusting the voltage to a value between the decomposition potentials of CaCl 2 and CaO, in-situ electro-deoxidation of CaO takes place on the surface of the synthesized Si-NWs, leading to the formation of a Ca layer. The formation of Ca-Si diffusion couple leads to the creation of vacancies within the Si-NWs, as the outward diffusion rate of Si exceeds the inward diffusion rate of Ca. These differential diffusion rates between Si and Ca in a diffusion couple exhibit an analogy to the Kirkendall effect. These vacancies gradually accumulate and merge, forming large voids, which ultimately result in the formation of hollow SiCa-NTs. Through a subsequent dealloying process, the removal of the embedded calcium leads to the formation of Si-NTs. Following the application of a carbon coating, the Si-NTs@C composite showcases a high initial discharge capacity of 3211 mAh·g −1 at 1.5 A·g −1 and exhibits exceptional long-term cycling stability, maintaining a capacity of 977 mAh·g −1 after 2000 cycles at 3.0 A·g −1 .

Laser-Assisted Solid-State Synthesis of Carbon Nanotube/Silicon Core/Shell Structures

Lasing of CdSe/SiO2 Nanocables Synthesized by the Facile Chemical Vapor Deposition Method.

Laser-Assisted Nanofabrication of Carbon Nanostructures

Synthesis and characterization of multiwalled carbon nanotube/CdS core/shell heterostructures

Localized Synthesis of Carbon Nanotube Films on Suspended Microstructures by Laser-Assisted Chemical Vapor Deposition

Silicon Nanowire Synthesis by Chemical Vapor Deposition

Laser Assisted Fabrication for Controlled Single-Walled Carbon Nanotube Synthesis and Processing（ Invited Paper）

What Can Lasers Do in the Nano-Fabrication of Carbon Nanotube Based Devices?

Synthesis of Carbon Nanotubes on Suspending Microstructures by Rapid Local Laser Heating

Synthesis of Carbon Nanotube Composites with Size-Controlled Silicon Nanoparticles

Single-Crystal Silicon Nanotubes, Hollow Nanocones, and Branched Nanotube Networks

Laser Direct Writing Carbon Nanotube Arrays on Transparent Substrates

The Fabrication of Vertically Aligned and Periodically Distributed Carbon Nanotube Bundles and Periodically Porous Carbon Nanotube Films Through a Combination of Laser Interference Ablation and Metal-Catalyzed Chemical Vapor Deposition.

Synthesis of Branched Sn/carbon Nanotube Core/shell Structures

Synthesis of Carbon Nano-Tubes by Pulsed Laser Ablation at Normal Pressure in Metal Nano-Sol

Laser assisted selective removal of metallic carbon nanotubes

Solid-State Limited Nucleation of NiSi/SiC Core-Shell Nanowires by Hot-Wire Chemical Vapor Deposition

Liquid-phase synthesis of single-walled carbon nanotubes using Co and Ir nanoparticle catalysts

Selective Growth of Carbon Nanotube on Silicon Substrates

Towards carbon-nanotube integrated devices: optically controlled parallel integration of single-walled carbon nanotubes.

Controllable synthesis of one-dimensional silicon nanostructures based on the dual effects of electro-deoxidation and the Kirkendall effect