Abstract:TiO2 has been intensively investigated as an anode material for lithium-ion batteries (LIBs) in 1.0–3.0 V (vs Li+/Li). However, it is a challenge to realize its theoretical capacity (336 mAh g–1) in this limited potential range. Extending the potential range below 1.0 V would increase its capacity but usually at the expense of its cyclic stability owing to the sluggish ionic diffusion and unsatisfactory structural stability. Here, three-dimensional (3D) macroporous TiO2 microspheres with interconnected pores and nanocrystalline thin walls have been constructed through a scalable template-assisted spray drying method to overcome these obstacles. When applied to LIBs, high and stable discharge capacity (300 mAh g–1 at 0.1 A g–1) as well as superior cyclic stability (242 mAh g–1 after 1000 cycles at 1.0 A g–1) can be achieved under deep discharging/charging conditions (0.01–3.0 V vs Li+/Li). Furthermore, the 3D macroporous structure is well preserved under deep discharging/charging and the in situ X-ray diffraction (XRD) patterns and Raman spectra reveal the dominant pseudocapacitive contribution at low potentials (0.01–1.0 V). This work not only develops a facile method to synthesize macroporous metal oxides but also provides insight into the lithium storage mechanism of TiO2 under deep discharging/charging conditions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02411?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02411</a>.Additional experimental details; comparison of the electrochemical performances (Table S1); SEM image of APF templates (Figure S1); FTIR spectrum (Figure S2); TGA curve (Figure S3); XPS survey spectrum, high-resolution Ti 2p spectrum, and high-resolution O 1s spectrum (Figure S4); XRD patterns (Figure S5); SEM and TEM images (Figure S6); HRTEM image (Figure S7); high-resolution C 1s XPS spectra (Figure S8); SEM images (Figure S9); EIS spectra (Figure S10); lithium storage performances (Figure S11); cycling performance (Figure S12); capacitive contributions (Figure S13); and Raman spectra (Figure S14) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02411/suppl_file/am1c02411_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Facile and controllable fabrication of three-dimensionally quasi-ordered macroporous TiO2 for high performance lithium-ion battery applications

Crystalline SnO2 @ Amorphous TiO2 Core-Shell Nanostructures for High-Performance Lithium Ion Batteries

Synthesis and Electrochemical Performance of Three-Dimensional Ordered Hierarchically Porous Li4Ti5O12 for High Performance Lithium Ion Batteries

Superior performance of ordered macroporous TiNb2O7 anodes for lithium ion batteries: Understanding from the structural and pseudocapacitive insights on achieving high rate capability

Conformal Electrodeposition of Poly(Phenylene Oxide) on Tio2 Nanotube Arrays with High Performance for Lithium Ion Battery

Fabrication of hollow TiO2 nanospheres for high-capacity and long-life lithium storage

Constructing Three-Dimensional Macroporous TiO 2 Microspheres with Enhanced Pseudocapacitive Lithium Storage under Deep Discharging/Charging Conditions

3D anatase TiO2 hollow microspheres assembled with high-energy {001} facets for lithium-ion batteries

Facile Synthesis of CTAB Assisted Hierarchical-Structure TiO2@SnO2 for Lithium Storage

Facile fabrication of one-dimensional mesoporous titanium dioxide composed of nanocrystals for lithium storage

TiO2 Microboxes with Controlled Internal Porosity for High‐Performance Lithium Storage

Flexible, three-dimensional ordered macroporous ZnO electrode with enhanced electrochemical performance in lithium-ion batteries

Facile Synthesis of Hierarchically Porous Li4Ti5O12 Microspheres for High Rate Lithium Ion Batteries

Fabrication of hierarchically porous TiO2 nanofibers by microemulsion electrospinning and their application as anode material for lithium-ion batteries

Facile Preparation of 3-Dimensional Interweaved Anatase TiO2 Hollow Nanowires and Its Lithium Storage Properties

Tailored Design Ti4+ Coordination via Coplanar Carboxyl and Hydroxyl Groups Toward High Purity TiO2(B) with Ultrafast Li+ Storage

Facile General Strategy Toward Hierarchical Mesoporous Transition Metal Oxides Arrays on Three-Dimensional Macroporous Foam with Superior Lithium Storage Properties

Facile Synthesis and Electrochemical Characterization of Porous and Dense TiO2 Nanospheres for Lithium-Ion Battery Applications

Seed-Assisted Synthesis Of Highly Ordered Tio2@Alpha-Fe2o3 Core/Shell Arrays On Carbon Textiles For Lithium-Ion Battery Applications

Flower-like TiO2 hollow microspheres with mixed-phases for high-pseudocapacitive lithium storage

Tailoring Porous Transition Metal Oxide for High-Performance Lithium Storage