Abstract:TiO2 has been intensively investigated as an anode material for lithium-ion batteries (LIBs) in 1.0–3.0 V (vs Li+/Li). However, it is a challenge to realize its theoretical capacity (336 mAh g–1) in this limited potential range. Extending the potential range below 1.0 V would increase its capacity but usually at the expense of its cyclic stability owing to the sluggish ionic diffusion and unsatisfactory structural stability. Here, three-dimensional (3D) macroporous TiO2 microspheres with interconnected pores and nanocrystalline thin walls have been constructed through a scalable template-assisted spray drying method to overcome these obstacles. When applied to LIBs, high and stable discharge capacity (300 mAh g–1 at 0.1 A g–1) as well as superior cyclic stability (242 mAh g–1 after 1000 cycles at 1.0 A g–1) can be achieved under deep discharging/charging conditions (0.01–3.0 V vs Li+/Li). Furthermore, the 3D macroporous structure is well preserved under deep discharging/charging and the in situ X-ray diffraction (XRD) patterns and Raman spectra reveal the dominant pseudocapacitive contribution at low potentials (0.01–1.0 V). This work not only develops a facile method to synthesize macroporous metal oxides but also provides insight into the lithium storage mechanism of TiO2 under deep discharging/charging conditions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02411?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02411</a>.Additional experimental details; comparison of the electrochemical performances (Table S1); SEM image of APF templates (Figure S1); FTIR spectrum (Figure S2); TGA curve (Figure S3); XPS survey spectrum, high-resolution Ti 2p spectrum, and high-resolution O 1s spectrum (Figure S4); XRD patterns (Figure S5); SEM and TEM images (Figure S6); HRTEM image (Figure S7); high-resolution C 1s XPS spectra (Figure S8); SEM images (Figure S9); EIS spectra (Figure S10); lithium storage performances (Figure S11); cycling performance (Figure S12); capacitive contributions (Figure S13); and Raman spectra (Figure S14) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02411/suppl_file/am1c02411_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

3D anatase TiO2 hollow microspheres assembled with high-energy {001} facets for lithium-ion batteries

Crystalline SnO2 @ Amorphous TiO2 Core-Shell Nanostructures for High-Performance Lithium Ion Batteries

Fabrication of hollow TiO2 nanospheres for high-capacity and long-life lithium storage

Hierarchical Nanosheet-Constructed Yolk-Shell TiO₂ Porous Microspheres for Lithium Batteries with High Capacity, Superior Rate and Long Cycle Capability.

Template-free construction of hollow TiO2 microspheres for long-life and high-capacity lithium storage

Flower-like TiO2 hollow microspheres with mixed-phases for high-pseudocapacitive lithium storage

Anatase/Rutile Tio2 Nanocomposite Microspheres with Hierarchically Porous Structures for High-Performance Lithium-Ion Batteries

Hollow TiO2–X Porous Microspheres Composed of Well-Crystalline Nanocrystals for High-Performance Lithium-Ion Batteries

Constructing Three-Dimensional Macroporous TiO 2 Microspheres with Enhanced Pseudocapacitive Lithium Storage under Deep Discharging/Charging Conditions

Facile Synthesis of Hierarchically Porous Li4Ti5O12 Microspheres for High Rate Lithium Ion Batteries

Graphitic Carbon Conformal Coating of Mesoporous TiO2 Hollow Spheres for High-Performance Lithium Ion Battery Anodes

Mesoporous Li4ti5o12 Hollow Spheres with Enhanced Lithium Storage Capability

Hollow Nanocubes Constructed from <001> Oriented Anatase TiO2nanoarrays: Topotactic Conversion and Fast Lithium-Ion Storage

TiO2 Microboxes with Controlled Internal Porosity for High‐Performance Lithium Storage

Controllable Synthesis of Mesostructures from TiO2 Hollow to Porous Nanospheres with Superior Rate Performance for Lithium Ion Batteries.

Well-defined Monodisperse Mesoporous TiNb6O17 Microspheres for Use in High-Performance Lithium-Ion Batteries

Facile Synthesis of CTAB Assisted Hierarchical-Structure TiO2@SnO2 for Lithium Storage

Hierarchical hollow Li4Ti5O12 urchin-like microspheres with ultra-high specific surface area for high rate lithium ion batteries

TiO2 Modified Α-Fe2o3 Pompon-Like Hollow Sphere As the Anode Material for Lithium-Ion Batteries with Mixed Lithiation Mechanisms

SiO@C/TiO2 nanospheres with dual stabilized architecture as anode material for high-performance Li-ion battery

Synthesis of sandwich-like TiO 2@C composite hollow spheres with high rate capability and stability for lithium-ion batteries