Abstract:This study addresses the challenges of time-delay and low accuracy in online gas-phase composition monitoring during olefin copolymerization processes. Three flowmeters based on different mechanisms are installed in series to measure the real-time exhaust gas flow rate from the reactor. For the same gas flow, the three flowmeters display different readings, which vary with the properties and composition of the gas mixture. Consequently, the composition of the mixed gas can be determined by analyzing the reading of the three flowmeters. Fitting equations and three machine learning models, namely decision trees, random forests, and extreme gradient boosting, are employed to calculate the gas composition. The results from cold-model experimental data demonstrate that the XGBoost model outperforms others in terms of accuracy and generalization capabilities. For the concentration of ethylene, propylene, and hydrogen, the determination coefficients (R2) were 0.9852, 0.9882, and 0.9518, respectively, with corresponding normalized root mean square error (NRMSE) values of 0.0352, 0.0312, and 0.0706. The effectiveness of the online monitoring device is further validated through gas phase copolymerization experiments involving ethylene and propylene. The yield and composition of the ethylene and propylene copolymers are successfully predicted using the online measurement data. To overcome the time-delay and low precision in on-line gas phase composition monitoring during olefin copolymerization, three flowmeters based on distinct principles are employed to detect exhaust gas in real-time. Machine learning models are used to calculate the gas composition. The efficacy of the online monitoring device is validated through gas phase copolymerization experiments of ethylene and propylene.image

Three-Stage Decomposition Modeling for Quality of Gas-Phase Polyethylene Process Based on Adaptive Hinging Hyperplanes and Impulse Response Template

Modeling of an Industrial Polycondensation Process for Polyethylene Terephthalate

Quality Predicting Models for Ethylene Terpolymerization to High-Performance Polyethylene

OPTIMAL GRADE TRANSITION IN CONTINUOUS POLYMERIZATION PROCESS

The Capacity Expansion of Hypol Polypropylene Plant by Process Reconstruction

Study on Optimal Strategy of Grade Transition in Industrial Fluidized Bed Gas-Phase Polyethylene Production Process

Quality Control in the Polypropylene Manufacturing Process: an Efficient, Data-Driven Approach

Optimization of grade transition for high-density polyethylene continuous slurry process

On-line Measurements and Model Analysis of Gas-phase Ethylene Polymerization Process in Fluidized Bed Reactor (II)

On‐Line Monitoring Device for Gas Phase Composition Based on Machine Learning Models and Its Application in the Gas Phase Copolymerization of Olefins

Modeling and Analysis of New Reactor Concepts for Poly(ethylene Terephthalate) Esterification Process

A Heuristic Approach to Grade Transition Strategy of the HDPE Slurry Process in Different Operation Modes

Kinetic Parameter Estimation for Linear Low-Density Polyethylene Gas-Phase Process from Molecular Weight Distribution and Short-Chain Branching Distribution Measurements

ARX-NNPLS Model Based Optimization Strategy and Its Application in Polymer Grade Transition Process*

Soft-sensing research on the gas phase ethylene polymerization in fluidized bed reactor based on DPCA-RBF network

Optimal Grade Transition of Polymerization Process with Path Constraints

Stability and dynamic behaviors of gas-phase ethylene polymerization process under condensed mode operation

Quality Prediction Via Semisupervised Bayesian Regression with Application to Propylene Polymerization

Modeling of the Molecular Weight Distribution and Short Chain Branching Distribution of Linear Low-Density Polyethylene from a Pilot Scale Gas Phase Polymerization Process

Dynamic process based soft sensing of melt flow rate