Abstract:The sensing of harmful gases and vapors is of fundamental interest to control the industrial emissions and environmental contamination. Nitrogen/phosphorus codoped carbon nanotube sponges (NP-CNTSs) were used to detect ethanol, acetone, cyclohexane, isopropanol, and methanol. The NP-CNTSs were produced through the aerosol-assisted chemical vapor deposition (AACVD) method using acetonitrile and triphenylphosphine as precursors at 1020 °C. The sensors based on NP-CNTSs were tested with varying operating temperatures (25-100 °C) and gas vapor concentrations (5-50 ppm). For instance, for a gas vapor concentration of 30 ppm and an operating temperature of 65 °C, the sensors showed changes in the electrical resistance of 1.12%, 1.21%, 1.09%, 2.4%, and 1.34% for ethanol, acetone, cyclohexane, isopropanol, and methanol, respectively. We found that the response and recovery times for isopropanol gas vapor are up to 43.7 s and 95 s, respectively. The current sensor outperformed the sensors reported in the literature by at least two times in the response measurement. Additionally, we performed van der Waals density functional theory calculations to elucidate the role of nitrogen and phosphorous codoped single-walled carbon nanotubes (SWCNTs) and their interaction with the considered gas molecule. We analyzed the molecular adsorption energy, optimized structures, and the density of states and calculated the electrostatic potential surface for N-doped, P-doped, NP-codoped, and OH-functionalized NP-codoped metallic SWCNTs-(6,6) and semiconducting SWCNTs-(10,0). Adsorption energy calculations revealed that in most cases the molecules are adsorbed to carbon nanotubes via physisorption. The codoping in SWCNTs-(6,6) promoted structural changes in the surface nanotube and marked chemisorption for acetone molecules.

Benzene Sensors Based on Multi-Walled Carbon Nanotube Networks Decorated with Metal Nanoclusters.

Study on Gas Sensing Property of Metal Particle Doped Multi-Walled Carbon Nanotubes

Nanocomposites of Carbon Nanotube (cnts)/cuo with High Sensitivity to Organic Volatiles at Room Temperature

Sensors for Organic Vapor Detection Based on Composites of Carbon Nonotubes Functionalized with Polymers

Preparation of CNTs/PANi core/shell-structured nanowires and improvement of sensitivity of chemical sensors

Palladium Modified Multi-Walled Carbon Nanotubes For Benzene Detection At Room Temperature

Nanoporous Functionalized WS2/MWCNTs Nanocomposite for Trimethylamine Detection Based on Quartz Crystal Microbalance Gas Sensor

N-Type Gas Sensing Characteristics of Chemically Modified Multi-Walled Carbon Nanotubes and PMMA Composite

The Research of Sensors for Toluene Detection Based on Multi-Wall Carbon Nanotubes

Multi-Walled Carbon Nanotubes Decorated with Silver Nanoparticles for Acetone Gas Sensing at Room Temperature

Thermodynamically and Kinetically Enhanced Benzene Vapor Sensor Based on the Cu-TCPP-Cu MOF with Extremely Low Limit of Detection

Metal‐Organic Framework Based Sensors for Benzene Vapor

Study of VOCs Sensing Property of Carbon Nanotubes and Their Modified Nano-Composites

Multi-walled Carbon Nanotube-Based Gas Sensors for NH3 Detection

Multi-Walled Carbon Nanotube-Based Gas Sensor for NH3 Detection at Room Temperature

Nitrogen-phosphorus codoped carbon nanotube sponges for detecting volatile organic compounds: experimental and DFT calculations

Gas sensing characteristics of multi-wall carbon nanotubes

A Novel Gas-Ionization Sensor Based on Aligned Multi-Walled Carbon Nanotubes

A Room Temperature VOCs Gas Sensor Based on a Layer by Layer Multi-Walled Carbon Nanotubes/Poly-ethylene Glycol Composite

Cu(II) Doped Multi-Walled Carbon Nanotubes As Sensing Materials for Toluene Detection

A Carbon Nanotube Gas Sensor Fabricated By Dielectrophoresis And Its Application For Nh3 Detection