Abstract:The gas-solid vertical single helical ribbon agitated reactor is widely used in the polypropylene industry. The gas flow and mass transfer determine the heat transfer capacity and product quality. In this work, the pressure drop was measured below and above minimum fluidization velocity (umf). Then, the axial and radial dispersion coefficients (DL and DR) were estimated below umf by measuring the step residence time distribution and the stationary radial tracer profiles, respectively. Pressure analysis show the agitation significantly reduces the bed pressure drop, changing the fixed bed below umf and bubbling bed above umf to an agitated bed with a periodic voidage. The DL was proportional to the gas velocity, with little influences of the stirring speed. The radial tracer profiles show the bed is divided by the inner diameter of the helical ribbon into the peripheral ascending region and the central descending region, without gas exchange between them. Furthermore. the tracer profiles in the descending region are classified into two types. For type I, the DR, calculated by the plug flow model with radial dispersion, is proportional to the gas velocity, with little effects of stirring speed. Type II shows uniform profiles due to the deflection of the gas flow toward the low pressure area at the inner diameter of helical ribbon. The causes of the two types are explained by the relative size of particle circulation and gas flux. These two flow regimes are quantitatively clarified with an empirical correlation of Re and Fr as flow regime transition boundary, namely dispersed plug flow and perfect mixing flow. With lower Re and higher Fr, it changes from dispersed plug flow to perfect mixing flow.

Fluid mixing performance of bubble column reactor enhanced by tilted porous baffle

Influence of Slurry Velocity and Concentration Distributions on Fischer-Tropsch Synthesis in Slurry Bubble Column Reactor

Experimental Investigation of Flow Development in Large-Scale Bubble Columns in the Churn-Turbulent Regime

Progress on agitated apparatus for polymer devolatilization and its CFD simulation

Research on the Design and Application of Efficient Catalysts Based on Interfacial Chemistry: Molecular Catalysts in Gas-Liquid Mixed Systems

Bubble Size “bimodal” Distribution Enhances Mixing and Mass Transfer in Slurry Bubbling Column Reactor

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Evolution and Interaction Characteristics of Liquid Flow and Bubbles in a Jet Bubbling Column

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Gas bubble behaviors in a gas–solid fluidized bed with an arch agitator

Hydrodynamic performance and structural optimization of a slurry bubble column with vertical tube internals

Experimental and Numerical Study on Flow Resistance and Bubble Transport in a Helical Static Mixer

Mass transfer enhancement and hydrodynamic performance with wire mesh coupling solid particles in bubble column reactor

Structure optimization and flow field characteristics of baffle-type impinging stream reactor

Enhancing the Acetylene Yield from Methane by Decoupling Oxidation and Pyrolysis Reactions: A Comparison with the Partial Oxidation Process

Effects of internals on macroscopic fluid dynamics in a bubble column

Ammoxidation of Propylene to Acrylonitrile in a Bench-Scale Circulating Fluidized Bed Reactor

Microbubble-Dominated Mass Transfer Intensification in the Process of Ammonia-Based Flue Gas Desulfurization

Hydrodynamics and OCM reaction performance in a bubbling fluidized bed reactor and a riser reactor

A pilot plant study and 2-D dispersion-reactor model for a high-density riser reactor

Improved mixing of solid suspensions in stirred tanks with interface baffles: CFD simulation and experimental validation