Abstract:A series of hydrocracking catalysts based on mesoporous molecular sieves of MCM-41 and SBA-15 with different silica to alumina ratios was prepared. Nickel and molybdenum were used as active metals to impregnate the extrudates prepared by using molecular sieves. The catalysts were characterized for physical and chemical properties and evaluated for the hydrocraking of desulfurised vacuum gas oil. The conversion of DS-VGO was lower as compared to that of the catalyst based on USY zeolite. However, the gas yield was lower in case of mesoporous materials based catalysts. Introduction Zeolites are widely used as catalysts in petroleum refining and for the production of petrochemicals and fine chemicals. Recently, the breakthrough discovery of the M41S family mesoporous materials [1,2] exemplified by the MCM-41 bearing hexagonal-close-packed channels. Despite the excellent structural properties, the hydrothermal stability of MCM-41 and MCM-41-like mesoporous materials was reported as lower than their counter part zeolites. Recently, a new kind of mesoporous silica, SBA-15, has been synthesized with poly (alkylene oxide) triblock copolymers such as poly (ethylene oxide)-poly (propylene oxide)poly (ethylene oxide) (PEO-PPO-PEO) [3]. Beside its uniform and large pore size channels (4.6-30 nm), SBA-15 possesses thick walls (3.1-6.4 nm). Therefore, it has much higher hydrothermal stability than MCM-41 [3]. Owing to their extremely large surface area (generally exceeding 1000 mg) and ultra large pore size these mesoporous materials have attracted great practical and academic interest as acid-catalyzed reactions of large molecules such as hydroprocessing of residual oil [4-5]. In this study, the preparation of MCM-41 and SBA-15 with Si/Al 10, 20 and hydrocracking catalysts based on these mesoporous materials along with USY zeolite are presented. Commercial USY zeolite used in this study also has mesopores in it. Nickel and molybdenum are impregnated as active metals. Mesoporous materials and hydrocracking catalysts prepared were characterized by XRD, surface are, pore volume, pore-size distribution, particle size measurement, and acidity measurement by FTIR and ammonia TPD. The side crushing strength of the extrudates with alumina binder was also measured by crushing strength tester. The catalysts were evaluated for hydrocracking of desulfurized vacuum gas oil (DS-VGO). The hydrocracking activity was measured by GC-SIMDIST method and sulfur and nitrogen contents of the product were measured by elemental analyzer.

Preparation of sulfated alumina supported on mesoporous MCM-41 silica and its application in esterification

Robust Mg(Ca)Zr-Doped Acid-Base Bifunctional Mesoporous Silica and Their Applications in the Deacetalization-Knoevenagel Reaction.

An Improvement of MCM-41 Supported Phosphoric Acid Catalyst for Alkylation Desulfurization of Fluid Catalytic Cracking Gasoline

Creation Of Acid Sites On Sba-15 Mesoporous Silica By Alumination

Preparation of Sulfo-Group-Bearing Mesoporous-Silica-Based Solid Acid Catalyst and Its Application to Direct Saccharification

Preparation of Fibrous SO42-/ZrO2-Nio Solid Acid Catalyst, Characterization and its Catalytic Properties

Synthesis and characterization of amorphous silica-alumina with enhanced acidity and its application in hydro-isomerization/cracking

One-Step Hydrogenation/Esterification Activity Enhancement over Bifunctional Mesoporous Organic–Inorganic Hybrid Silicas

Catalytic Activities and Properties of Sulfated Zirconia Supported on Mesostructured Γ-Al2o3

"Synthesis and characterization of mesoporous V-Mo-MCM-41 nanocatalysts: Enhancing efficiency in oxalic acid synthesis"

Preparation of Solid Acid Catalyst Packing AAO/SBA-15-SO3H and Application for Dehydration of Xylose to Furfural

Synthesis of SAPO-34 nanocrystallites by epoxy-functional organosilane with improved MTO catalytic performance

Esterification And Transesterification On Al2o3-Doped Sulfated Tin Oxide Solid Acid Catalysts

Investigation on preparation and application of solid acidic catalysts

Preparation of n-amyl acetate via esterification of acetic acid and n-amyl alcohol using [HSO3-pmim][HSO4]/SiO2 as catalyst: Catalyst preparation, characterization and reaction kinetics

Preparation of meso-macro bimodal porous amorphous silica-alumina as an acidic catalyst

Esterification and Transesterification on Al 2 O 3 -Doped Sulfated Tin Oxide Solid Acid Catalysts

Preparation and Catalytic Performance of Solid Acid Catalyst HClO_4/SBA-15

Synthesis and Catalytic Evaluation of Mesoporous Molecular Sieve Supported Hydrocracking Catalysts

Sulfonic acid-type hydrothermal carbon microspheres as stable, efficient catalysts for transesterification reactions

Stability of Novel Eco-Friendly Sulfated Metal Oxide Solid Acid Catalyst for Esterification and Condensation Reaction