Abstract:A series of hydrocracking catalysts based on mesoporous molecular sieves of MCM-41 and SBA-15 with different silica to alumina ratios was prepared. Nickel and molybdenum were used as active metals to impregnate the extrudates prepared by using molecular sieves. The catalysts were characterized for physical and chemical properties and evaluated for the hydrocraking of desulfurised vacuum gas oil. The conversion of DS-VGO was lower as compared to that of the catalyst based on USY zeolite. However, the gas yield was lower in case of mesoporous materials based catalysts. Introduction Zeolites are widely used as catalysts in petroleum refining and for the production of petrochemicals and fine chemicals. Recently, the breakthrough discovery of the M41S family mesoporous materials [1,2] exemplified by the MCM-41 bearing hexagonal-close-packed channels. Despite the excellent structural properties, the hydrothermal stability of MCM-41 and MCM-41-like mesoporous materials was reported as lower than their counter part zeolites. Recently, a new kind of mesoporous silica, SBA-15, has been synthesized with poly (alkylene oxide) triblock copolymers such as poly (ethylene oxide)-poly (propylene oxide)poly (ethylene oxide) (PEO-PPO-PEO) [3]. Beside its uniform and large pore size channels (4.6-30 nm), SBA-15 possesses thick walls (3.1-6.4 nm). Therefore, it has much higher hydrothermal stability than MCM-41 [3]. Owing to their extremely large surface area (generally exceeding 1000 mg) and ultra large pore size these mesoporous materials have attracted great practical and academic interest as acid-catalyzed reactions of large molecules such as hydroprocessing of residual oil [4-5]. In this study, the preparation of MCM-41 and SBA-15 with Si/Al 10, 20 and hydrocracking catalysts based on these mesoporous materials along with USY zeolite are presented. Commercial USY zeolite used in this study also has mesopores in it. Nickel and molybdenum are impregnated as active metals. Mesoporous materials and hydrocracking catalysts prepared were characterized by XRD, surface are, pore volume, pore-size distribution, particle size measurement, and acidity measurement by FTIR and ammonia TPD. The side crushing strength of the extrudates with alumina binder was also measured by crushing strength tester. The catalysts were evaluated for hydrocracking of desulfurized vacuum gas oil (DS-VGO). The hydrocracking activity was measured by GC-SIMDIST method and sulfur and nitrogen contents of the product were measured by elemental analyzer.

"Synthesis and characterization of mesoporous V-Mo-MCM-41 nanocatalysts: Enhancing efficiency in oxalic acid synthesis"

Facile surfactant-assisted synthesis of nanosheet-like mesoporous SAPO-34 zeolites and catalysis performance for methanol to olefins

[Synthesis and catalytic-isomerization performance of Al-MCM-41 mesoporous sieves]

Synthesis and Catalytic Evaluation of Mesoporous Molecular Sieve Supported Hydrocracking Catalysts

Synthesis and Characterization of AlMCM-41 Molecular Sieves

Preparation and Characterization of P–Mo–V Mixed Oxide-Incorporating Mesoporous Silica Catalysts for Selective Oxidation of Methane to Formaldehyde

Nickel and Oxo-Vanadium Complexes of Adenine on Modified Mesoporous MCM-41 as Chemoselective, Efficient, and Reusable Catalysts in the Oxidation of Sulfides and Oxidative Coupling of Thiols

Synthesis of SAPO-34 nanocrystallites by epoxy-functional organosilane with improved MTO catalytic performance

MOF-Assisted Synthesis of Highly Mesoporous Cr 2 O 3 /SiO 2 Nanohybrids for Efficient Lewis-Acid-Catalyzed Reactions

Synthesis and Characterization of Functionalize HY Zeolite With Sulfunic Acid, A Micro-meso Structure as an Efficient Reusable Catalyst in Organic Transformations

Si/Al Ratio Induced Structure Evolution During Desilication-Recrystallization of Silicalite-1 to Synthesize Nano-Zsm-5 Catalyst for MTH Reaction

Surfactant-free Synthesis of Mesoporous Silica Materials (Using Tetraetylorthosilicate and Oleic Acid): Preparation, Characterization, and Catalytic Applications

Hierarchically structured SAPO-5 molecular sieve catalysts with tailored mesoporosity for alkylation reaction

Synthesis and Characterization of Nanocrystalline Micro-Mesoporous ZSM-5/MCM-41 Composite Zeolite

Synthesis of nanosheet SSZ-39 zeolite with enhanced catalytic performance in methanol-to-olefins reaction

Catalysts from MCM-41: framework modification, pore size engineering, and organic–inorganic hybrid materials

Organosilane Surfactant-Assisted Synthesis of Mesoporous SSZ-39 Zeolite with Enhanced Catalytic Performance in the Methanol-to-olefins Reaction

Synthesis of Nano-sheet SAPO-34 Zeolites Via Aminothermal Method and Its Methanol to Olefins (MTO) Performance

Synthesis, characterization and catalytic performance of SAPO-34 molecular sieves for methanol-to-olefin (MTO) reaction

Synthesis of mesoporous molecular sieves and their application as supports for catalysts in F-T synthesis

Synthesis of nanosized mesoporous Co–Al spinel and its application as solid base catalyst