Abstract:Tin is a promising high-capacity anode material for lithium-ion batteries, but it usually suffers from the problem of poor cycling stability due to the large volume change during the charge-discharge process. In this article, porous nano-sized Sn@C/graphene electrode material with three-dimensional carbon network was designed and prepared. Reducing the size of the Sn particles to nanoscale can mitigate the absolute strain induced by the large volume change during lithiation-delithiation process, and retard particle pulverization. The porous structure can provide a void space, which helps to accommodate the volume changes of the Sn nanoparticles during the lithium uptake-release process. The carbon shell can avoid the aggregation of the Sn nanoparticles on the same piece of graphene and detachment of the pulverized Sn particles during the charge-discharge process. The 3D carbon network consisted of graphene sheets and carbon shells can not only play a structural buffering role in minimizing the mechanical stress caused by the volume change of Sn, but also keep the overall electrode highly conductive during the lithium uptake-release process. As a result, the as-prepared Sn@C/graphene nanocomposite as an anode material for lithium-ion batteries exhibited outstanding cyclability. The reversible specific capacity is almost constant from the tenth cycle to the fiftieth cycle, which is about 600 mA h g 1. The strategy presented in this work may be extended to improve the cycle performances of other high-capacity electrode materials with large volume variations during charge-discharge processes. Crown Copyright (C) 2014 Published by Elsevier B.V. All rights reserved.

Li3V2(PO4)3@C/graphene Composite with Improved Cycling Performance As Cathode Material for Lithium-Ion Batteries

Ternary Perovskite Cobalt Titanate/Graphene Composite Material As Long-Term Cyclic Anode for Lithium-Ion Battery

Synthesis and Properties of LiFePO4/LiNi0.8Co0.15Al0.05O2 Composite Cathode Material Modificated by Graphene for Lithium Ion Battery

Synergistic Ternary Composite (carbon/fe3 O4 @graphene) with Hollow Microspherical and Robust Structure for Li-Ion Storage.

Enhanced Cycling Performance of Fe3O4–graphene Nanocomposite As an Anode Material for Lithium-Ion Batteries

Fe 3 O 4 /graphene Composites with a Porous 3D Network Structure Synthesized Through Self-Assembly under Electrostatic Interactions As Anode Materials of High-Performance Li-Ion Batteries

Graphene-Wrapped Fe3o4 Anode Material with Improved Reversible Capacity and Cyclic Stability for Lithium Ion Batteries

Fe 3 C@carbon Nanocapsules/expanded Graphite As Anode Materials for Lithium Ion Batteries

A simple solvothermal route to synthesize graphene-modified LiFePO 4 cathode for high power lithium ion batteries

Carbon-coated Li3V2(PO4)(3) Composite Cathode Material for Lithium-Ion Batteries: Sol-gel Synthesis and Performance

<i>In Situ</i> Coating of Li<sub>7</sub>P<sub>3</sub>S<sub>11</sub> Electrolyte on CuCo<sub>2</sub>S<sub>4</sub>/Graphene Nanocomposite as a High-Performance Cathode for All-Solid-State Lithium Batteries

Graphene Wrapped Lifepo4/C Composites As Cathode Materials for Li-Ion Batteries with Enhanced Rate Capability

Design and Synthesis of Porous Nano-Sized Sn@C/graphene Electrode Material with 3D Carbon Network for High-Performance Lithium-Ion Batteries

Li3V2(PO4)3@C core-shell nanocomposite as a superior cathode material for lithium-ion batteries

In Situ Coating of Li 7 P 3 S 11 Electrolyte on CuCo 2 S 4 /Graphene Nanocomposite as a High-Performance Cathode for All-Solid-State Lithium Batteries

Graphene-Li2S-Carbon Nanocomposite for Lithium-Sulfur Batteries

A high capacity porous Co3O4@graphene composite as lithium battery anode

Three-dimensional graphene-wrapped Co0.85Se@C as high volumetric capacity anode material for lithium-ion batteries

Off-stoichiometric Li3-3xV2+x(PO4)3/C As Cathode Materials for High-Performance Lithium-Ion Batteries

Superior Cycle Performance of Sn@C/graphene Nanocomposite As an Anode Material for Lithium-Ion Batteries

Improved Cyclability of Lithium-Ion Battery Anode Using Encapsulated V2o3 Nanostructures in Well-Graphitized Carbon Fiber