Abstract:With a theoretical capacity of 1166 mA·h·g(-1), lithium sulfide (Li(2)S) has received much attention as a promising cathode material for high specific energy lithium/sulfur cells. However, the insulating nature of Li(2)S prevents the achievement of high utilization (or high capacity) and good rate capability. Various efforts have been made to ameliorate this problem by improving the contact between Li(2)S and electronic conductors. In the literature, however, a relatively high capacity was only obtained with the Li(2)S content below 50 wt %; therefore, the estimated cell specific energy values are often below 350 W·h·kg(-1), which is insufficient to meet the ever-increasing requirements of newly emerging technologies. Here, we report a cost-effective way of preparing nanostructured Li(2)S-carbon composite cathodes by high-energy dry ball milling of commercially available micrometer-sized Li(2)S powder together with carbon additives. A simple but effective electrochemical activation process was used to dramatically improve the utilization and reversibility of the Li(2)S-C electrodes, which was confirmed by cyclic voltammetry and electrochemical impedance spectroscopy. We further improved the cycling stability of the Li(2)S-C electrodes by adding multiwalled carbon nanotubes to the nanocomposites. With a very high specific capacity of 1144 mA·h·g(-1) (98% of the theoretical value) obtained at a high Li(2)S content (67.5 wt %), the estimated specific energy of our cell was ∼610 W·h·kg(-1), which is the highest demonstrated so far for the Li/Li(2)S cells. The cells also maintained good rate capability and improved cycle life. With further improvement in capacity retention, nanostructured Li(2)S-C composite cathodes may offer a significant opportunity for the development of rechargeable cells with a much higher specific energy.

In Situ Coating of Li 7 P 3 S 11 Electrolyte on CuCo 2 S 4 /Graphene Nanocomposite as a High-Performance Cathode for All-Solid-State Lithium Batteries

<i>In Situ</i> Coating of Li<sub>7</sub>P<sub>3</sub>S<sub>11</sub> Electrolyte on CuCo<sub>2</sub>S<sub>4</sub>/Graphene Nanocomposite as a High-Performance Cathode for All-Solid-State Lithium Batteries

Nanostructured Nb2O5 Cathode for High-Performance Lithium-Ion Battery with Super-P and Graphene Compound Conductive Agents

Fe3S4@Li7P3S11 nanocomposites as cathode materials for all-solid-state lithium batteries with improved energy density and low cost

Graphene-Li2S-Carbon Nanocomposite for Lithium-Sulfur Batteries

Niobium sulfide nanocomposites as cathode materials for all-solid-state lithium batteries with enhanced electrochemical performance

Li3V2(PO4)3@C/graphene Composite with Improved Cycling Performance As Cathode Material for Lithium-Ion Batteries

Rational Coating of Li7P3S11 Solid Electrolyte on MoS2 Electrode for All-Solid-state Lithium Ion Batteries

High-Performance Cathodes Prepared Via Liquid-Phase Method and Catalyzed by Co9S8 for All-Solid-State Lithium-Sulfur Batteries

Catalytic cobalt phosphide Co2P/carbon nanotube nanocomposite as host material for high performance lithium-sulfur battery cathode

Fe<sub>3</sub>S<sub>4</sub>@Li<sub>7</sub>P<sub>3</sub>S<sub>11</sub> nanocomposites as cathode materials for all-solid-state lithium batteries with improved energy density and low cost

Multi-electron reaction based molybdenum pentasulfide towards high-energy density all-solid-state lithium batteries

Synthesis and Electrochemical Performances of Cobalt Sulfides/graphene Nanocomposite As Anode Material of Li-ion Battery

Yolk-shell Structured CuSi2P3@Graphene Nanocomposite Anode for Long-Life and High-Rate Lithium-Ion Batteries

Nanosulfur/polyaniline/graphene composites for high-performance lithium–sulfur batteries: One pot in-situ synthesis

High Capacity and Rate Performance of LiNi0.5Co0.2Mn0.3O2composite Cathode for Bulk-Type All-Solid-state Lithium Battery

Nickel sulfide anchored carbon nanotubes for all-solid-state lithium batteries with enhanced rate capability and cycling stability

Nanostructured Li₂S-C Composites As Cathode Material for High-Energy Lithium/sulfur Batteries.

Li2s@C Composite Incorporated into 3d Reduced Graphene Oxide As A Cathode Material for Lithium-Sulfur Batteries

Li3InCl6-coated LiCoO2 for high-performance all solid-state batteries

Achieving stable all-solid-state lithium-metal batteries by tuning the cathode-electrolyte interface and ionic/electronic transport within the cathode