Abstract:Zwitterionic polysulfone (PSf) ultrafiltration membranes were fabricated by non-solvent phase separation (NIPS) method. Herein, a casting solution at 45 °C was developed by using chloromethylated polysulfone (CMPSf), N, N-dimethylacetamide (DMAc) as a solvent, 4-amino-benzenesulfonic acid monosodium salt (ABS) as a cross-linking agent, and Na 2 CO 3 as an acid binder. Simultaneously, the occurrence of the electrophilic substitution reaction between ABS and CMPSf caused the formation of ABS grafting CMPSf (CMPSf-g-ABS). After a specific reaction time, the casting solution was applied to cast membranes, which were subsequently submerged in coagulation bath. A zwitterionic ultrafiltration (ZUF) membrane was obtained using NIPS following the treatment of hydrochloric acid (HCl) solution (1 M mol). Because of the formation of cross-linked CMPSf-g-ABS, the results revealed that the casting solution's viscosity increased sharply from 425.4 mPa s at the initial stage (0 h) to 4810.8 mPa s (22 h). Interestingly, the morphology of the membranes with an asymmetric finger-like structure at 0 h gradually transformed to a gradient sponge-like structure after 22 h. Specifically, the ZUF membrane (M22-H) with the gel fraction of 72.1% procured after the reaction of 22 h demonstrated a low water contact angle (40.17°) and a high pure water permeance (420.4 L m −2 h −1 bar −1 ). The M22-H also exhibited a high flux recovery rate (FRR) (90.2%), bovine serum albumin (BSA) rejection (>95%), and Escherichia coli ( E. coli ) antibacterial rate (96.2%). The surface of the ZUF membrane with numerous zwitterionic groups enhances the hydration layer's energy (i region 16 nm), causing a significant improvement in the antifouling performance. This research opens new avenues for preparing zwitterionic functional membranes.

Preparation and Characterization of a Novel Polysulfone UF Membrane Using a Copolymer with Capsaicin-Mimic Moieties for Improved Anti-Fouling Properties

Preparation and Performance of Quaternary Ammonium Salt-Containing Methacrylate Copolymer-Based Ultrafiltration Membranes

Antifouling and Antibacterial Behavior of Membranes Containing Quaternary Ammonium and Zwitterionic Polymers

Improved Antifouling Properties of Polyvinyl Chloride Blend Membranes by Novel Phosphate Based-Zwitterionic Polymer Additive

An Acid Resistant Nanofiltration Membrane Prepared from a Precursor of Poly(s-Triazine-amine) by Interfacial Polymerization

Improvement of Antifouling and Antibacterial Properties of Poly(ether Sulfone) UF Membrane by Blending with a Multifunctional Comb Copolymer

Preparation and Characterization of an Amphiphilic Polyamide Nanofiltration Membrane with Improved Antifouling Properties by Two-Step Surface Modification Method

Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics

Preparation of Antifouling Ultrafiltration Membranes from Copolymers of Polysulfone and Zwitterionic Poly(arylene Ether Sulfone)s

Zwitterionic Polysulfone Copolymer/Polysulfone Blended Ultrafiltration Membranes with Excellent Thermostability and Antifouling Properties

Novel antifouling polysulfone matrix membrane modified with zwitterionic polymer

Molecular design of antifouling ultrafiltration membranes via copolymerization of bactericidal and hydrophilic polymers

Dependable Performance of Thin Film Composite Nanofiltration Membrane Tailored by Capsaicin-Derived Self-Polymer

A Novel Antifouling and Thermally Stable Polysulfone Ultrafiltration Membranes with Sulfobetaine Polyimide As Porogen

PVA and CS cross-linking combined with in situ chimeric SiO2 nanoparticle adhesion to enhance the hydrophilicity and antibacterial properties of PTFE flat membranes

Surface Modification of Poly(vinylidene fluoride) Ultrafiltration Membranes with Chitosan for Anti-Fouling and Antibacterial Performance

Improved Antifouling Properties of Poly(Ether Sulfone) Membrane by Incorporating the Amphiphilic Comb Copolymer with Mixed Poly(Ethylene Glycol) and Poly(Dimethylsiloxane) Brushes

Preparation of novel zwitterionic polysulfone ultrafiltration membranes for the dual-enhanced antifouling and antibacterial properties by in-situ one pot crosslinking reaction

Preparation of pH-responsive asymmetric polysulfone ultrafiltration membranes with enhanced anti-fouling properties and performance by incorporating poly(2-ethyl-2-oxazoline) additive

Preparation of polysulfone-based nanofiber Janus membrane for membrane distillation containing organic pollutants

Enhancing biofouling resistance in microfiltration membranes through capsaicin-derivative functionalization