Abstract:Endovascular prostheses, assembled from tubular textile fabric and wire stent components, are deployed and expanded non-invasively from catheters for the repair of aneurysms in medium and large caliber arteries. Manufacturers prefer woven fabrics or porous tubes to be supported by a metallic frame. Woven fabrics can be manufactured much thinner than any knitted structure, and thus they permit the use of a smaller delivery catheter. As the key component of an endovascular prosthesis, the tubular textile fabric plays a vital role in separating the pathological vasculature from the normal blood circulation. It is therefore important to understand the relationship between the design parameters of the textile fabric and the mechanical properties of the endovascular prosthesis. In this study, a series of woven endovascular prototype structures were woven using a range of different weft yarns and two different weave designs. Using a 30 denier polyester (PET) multifilament yarn in the warp direction, tubular textile fabrics were woven in 3/1 twill and plain weave constructions with 20 and 30 denier monofilament and multifilament polyester (PET) weft yarns. The samples were woven on a specially built narrow width prototyping loom, followed by finishing, which was carried out in order to achieve improved cleanliness, uniformity and dimensional stability. Before and after finishing, the basic dimensional parameters, such as thickness and density, and important physical properties, such as water permeability and bursting strength, were measured and compared. By this approach we were able to determine the relationships between the woven textile design parameters and the physical properties of endovascular prostheses, and to conclude that the use of different yarns and weave types leads to different trends in thickness, bursting strength, and water permeability performance.

A prospective bifurcated biomedical stent with seamless woven structure

Finite element analysis of braided dense-mesh stents for carotid artery stenosis

Braided Bioresorbable Cardiovascular Stents Mechanically Reinforced by Axial Runners.

A Novel Braided Biodegradable Stent for Use in Congenital Heart Disease: Short-term Results in Porcine Iliac Artery

Mechanical and Biocompatibility Performance of Bicomponent Polyester/Silk Fibroin Small-Diameter Arterial Prostheses

A hazardous boundary of Poly(L-lactic acid) braided stent design: Limited elastic deformability of polymer materials

A single-tube-braided stent for various airway structures

A study of a biodegradable braided Mg stent for biliary reconstruction

Influence Of Textile Design And Processes On The Mechanical Properties Of Woven Endovascular Prostheses

3D-Printed Poly (P-Dioxanone) Stent for Endovascular Application: In Vitro Evaluations

Composite self-expanding bioresorbable prototype stents with reinforced compression performance for congenital heart disease application: Computational and experimental investigation

Innovative textile structures designed to prevent type III endoleaks in endovascular stent-grafts

Woven polyester vascular stent-grafts with surface modification of chitosan/heparin

[Design and mechanical properties of biodegradable polymeric stent]

Antistricture Ureteral Stents with a Braided Composite Structure and Surface Modification with Antistenosis Drugs

The Development of Design and Manufacture Techniques for Bioresorbable Coronary Artery Stents

Additive Manufacturing of Biodegradable Molybdenum – From Powder to Vascular Stent

3D Printing and Characterization of the Biodegradable Vascular Stent

Development of a polycaprolactone/poly(p-dioxanone) bioresorbable stent with mechanically self-reinforced structure for congenital heart disease treatment.

A Review of Woven Tracheal Stents: Materials, Structures, and Application

A Hybrid Tubular Braid With Improved Longitudinal Stiffness For Medical Catheter