Abstract:Abstract. With the accumulation of data about biogenic volatile organic compound (BVOC) emissions from plants based on branch-scale enclosure measurements worldwide, it is vital to assure that measurements are conducted using well-characterized dynamic chambers with good transfer efficiencies and less disturbance on natural growing microenvironments. In this study, a self-made cylindrical semi-open dynamic chamber with a Teflon-coated inner surface was characterized both in the lab with standard BVOC mixtures and in the field with typical broadleaf and coniferous trees. The lab simulation with a constant flow of standard mixtures and online monitoring of BVOCs by proton transfer reaction time-of-flight mass spectrometry (PTR-ToF-MS) revealed lower real-time mixing ratios and shorter equilibrium times than theoretically predicted due to wall loss in the chamber and that larger flow rates (shorter residence times) can reduce the adsorptive loss and improve the transfer efficiencies. However, even when flow rates were raised to secure residence times of less than 1 min, transfer efficiencies were still below 70 % for heavier BVOCs like α-pinene and β-caryophyllene. Relative humidity (RH) impacted the adsorptive loss of BVOCs less significantly when compared to flow rates, with compound-specific patterns related to the influence of RH on their adsorption behaviour. When the chamber was applied in the field to a branch of a Mangifera indica tree, the ambient–enclosure temperature differences decreased from 4.5±0.3 to 1.0±0.2 ∘C and the RH differences decreased from 9.8 ± 0.5 % to 1.2±0.1 % as flow rates increased from 3 L min−1 (residence time ∼4.5 min) to 15 L min−1 (residence time ∼0.9 min). At a medium flow rate of 9 L min−1 (residence time ∼1.5 min), field tests with the dynamic chamber for Mangifera indica and Pinus massoniana branches revealed enclosure temperature increase within +2 ∘C and CO2 depletion within −50 ppm when compared to their ambient counterparts. The results suggested that substantially higher air circulating rates would benefit by reducing equilibrium time, adsorptive loss, and the ambient–enclosure temperature and RH differences. However, even under higher air circulating rates and with inert Teflon-coated inner surfaces, the transfer efficiencies for monoterpene and sesquiterpene species are not so satisfactory, implying that emission factors for these species might be underestimated if they are obtained by dynamic chambers without certified transfer efficiencies and that further efforts are needed for field measurements to improve accuracies and narrow the uncertainties of the emission factors.

Effects of Configuration and Headspace Wind Profile on the Performances of Flux Chambers in Gas Emission Measurement: A Laboratory Study

Measurements and Calculations of Ventilation Rate for Naturally Ventilated Animal Buildings: A Review

Numerical Model for Static Chamber Measurement of Multi-Component Landfill Gas Emissions and Its Application

A Numerical Model For Error Analyses Of Static Chamber Method Used At Landfill Site

Design and characterization of a semi-open dynamic chamber for measuring biogenic volatile organic compound (BVOC) emissions from plants

Development and performance evaluation of a novel environmental test chamber and emission simulation

A Framework and Experimental Study of an Improved VOC/formaldehyde Emission Reference for Environmental Chamber Tests

Direct Measurements of the Volume Flow Rate and Emissions in a Large Naturally Ventilated Building

Dynamic chamber as a more reliable technique for measuring methane emissions from aquatic ecosystems

Convenient, Rapid and Accurate Measurement of SVOC Emission Characteristics in Experimental Chambers

Study on impact factors of tracer gas method in investigations of gaseous pollutant transport and building ventilation

Computational fluid dynamics analysis of a micro-scale chamber for measuring organic chemical emission parameters

VOC emissions from a LIFE reference: Small chamber tests and factorial studies

Understanding the role of flux chamber configuration in the measurement of VOC emissions from porous media

A standard reference for chamber testing of material VOC emissions: Design principle and performance

Experimental Study of Dense Gas Contaminant Transport Characteristics in a Large Space Chamber

The effect of external wind speed and direction on sampling point concentrations, air change rate and emissions from a naturally ventilated dairy building

Airtightness measurement of an outdoor chamber using the Pulse and blower door methods under various wind and leakage scenarios

Experimental Study of Heavy Contaminant Gas Distribution in a Large Space Chamber

A Rapid and Accurate Method, Ventilated Chamber C-history Method, of Measuring the Emission Characteristic Parameters of Formaldehyde/vocs in Building Materials

Global Research Alliance N2 O chamber methodology guidelines: Design considerations