Abstract:The lateral bearing performance of a defective pile-supported wharf located on a slope was investigated through centrifuge modeling, and a numerical model was employed to back-analyze the centrifuge test data. The pile foundation system was composed of double-plumb, single-plumb, and batter piles, and the defects were located at the front row of the double-plumb piles. The failure mode, bearing lateral load, bent displacement, and pile bending moments were examined. The results show that overturning with slight torsion occurred in the bent under the lateral load. The piles clearly deformed around defects and were separated from the soil on the landside. The lateral bent displacement increased rapidly after a threshold lateral load value was reached. The bending moments were generally positive (i.e., the side facing the water was in tension) in the upper parts and negative in the lower parts of the double-plumb piles. The bending moments of the double-plumb pile heads increased with the lateral load, whereas the bending moments directly underneath the slope surface exhibited decreasing-constant tendencies with increasing lateral load. The bending moment of the single-plumb pile was generally positive above the slope surface and in compression below the slope surface, and decreasing-constant tendencies were observed with increasing lateral load just below the slope surface. The bending moment of the forward batter pile was negative and decreased with the lateral load around the slope surface and in the middle of the soil. The bending moment of the backward batter pile was generally positive above the slope surface, negative below the slope surface, and remained almost constant around the soil.

Test and Theoretical Research on Influence of Axial Load on Lateral Bearing Capacity of Batter Piles

Lateral Bearing Performance of a Defective Pile-Supported Wharf with Batter Piles

Model Tests on Elevated Piles Subjected to Lateral Static and Impact Loading

Model tests on the bearing capacity of precast oxen-ended micro pipe plies in sort soil

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Model tests on characteristics of ocean and offshore elevated piles with large lateral deflection

Model Test Study of Bearing Behavior of Small Prefabricated Piles in Soft Soil Area

Effect of Loading Rate on Lateral Pile-Soil Interaction in Sand Considering Partially Drained Condition

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Model Test on Load Transfer Mechanism of a Static Drill Rooted Nodular Pile

Field Test on the Influence of the Cemented Soil Around the Pile on the Lateral Bearing Capacity of Pile Foundation

A test on base bearing capacity of static drill rooted nodular pile

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups

Analysis of Axial Load-Transfer of Large-Diameter Cast-in-situ Tubular Pile

Centrifugal model tests on batter pile groups under eccentric lateral loads

Behavior Analysis of Laterally Loaded Single Pile under Large Deflection

A P-Y Curve Method for Horizontal Bearing Characteristics of Single Batter Pile in Sands

Model Test on Bearing Characteristic of Static Drill Rooted Energy Pile

Analysis method for pile groups subjected to lateral and torsional loads

A Model Test on the Behavior of A Static Drill Rooted Nodular Pile under Compression

Model test study on horizontal bearing behavior of pile under existing vertical load