Abstract:Chemical modification of wood mainly aims at improving dimensional stability, resistance to biodeterioration and surface degradation. In some cases, it is specifically targeted at adapting or improving mechanical performance. However, a general understanding of the effects of chemical modification on the mechanical properties of wood, which would facilitate more efficient modification strategies, is missing. Here, a combined experimental and simulation study is provided to gain a more general understanding of the mechanical behaviour of chemically modified wood. In the first part of this study, the mechanical properties of chemically modified Norway spruce are studied experimentally. In Mora Mendez et al. (Wood Sci Technol <a href="#CR31">2019</a>), simulations of different types of chemical modifications will be presented using a multi-scale model and the outcome will be compared with the obtained experimental data. Chemical modification was based on a two-step modification process. The first step involved methacrylation of the OH-groups in the cell wall. In the second step, in situ polymerization of styrene was induced in the methacrylated samples, which resulted in a partial cell wall and lumen filling. Tensile stiffness and rolling shear stiffness were analysed for methacrylated and polymerized samples. Whereas only small changes in mechanical properties were found for methacrylated samples, the polymerization process led to pronounced increases in elastic modulus and shear stiffness because of weight percent gains of 60–95%. Yet, the specific stiffness was lowered, as the density increase was disproportionate to the stiffness increase. Moreover, a pronounced improvement in rolling shear modulus (GRT) by a factor of 4.5 was obtained for the in situ polymerized specimen.

Effects of Chemical Modification on the Mechanical Properties of Wood

Effects of chemical modification and nanotechnology on wood properties

Wood modification with N-methylol and N-methyl compounds: a case study on how non-fixated chemicals in modified wood may affect the classification of their durability

Ultra-High-Pressure Modification of Wood: Densification and Dyeing

Impacts of chemical modification of wood on water absorption: a review

Mild hydrothermal modification of beech wood (Zelkova schneideriana Hand-Mzt): its physical, structural, and mechanical properties

New Perspective on Wood Thermal Modification: Relevance between the Evolution of Chemical Structure and Physical-Mechanical Properties, and Online Analysis of Release of VOCs

Tensile and Impact Bending Properties of Chemically Modified Scots Pine

Comparative studies on the durability and moisture performance of wood modified with cyclic N-methylol and N-methyl compounds

Mechanical properties of beech wood treated with malic acid-based polyester

Effect of Chemical Modification on Mechanical Properties of Wood-Plastic Composite Injection-Molded Parts

Chemical changes in thermally modified, acetylated and melamine formaldehyde resin impregnated beech wood

Manufacturing and Characterization of Modified Wood with In Situ Polymerization and Cross-linking of Water-Soluble Monomers on Wood Cell Walls

Effect of Thermal Modification on the Nano-Mechanical Properties of the Wood Cell Wall and Waterborne Polyacrylic Coating

Wood modification with phenol urea formaldehyde (PUF) resin: the influence of wood species selection on the dimensional stability

Mechanical behaviour of chemically modified Norway spruce (Picea abies L. Karst.): Experimental mechanical studies on spruce wood after methacrylation and in situ polymerization of styrene

A Review on the Effect of Wood Surface Modification on Paint Film Adhesion Properties

ENERGY SAVING OF WOOD DUE TO ITS MODIFICATION

Research on Enhancing the Comprehensive Performance of Fir Wood through Chemical Modification with a Biobased Unsaturated Polyester

Thermal and chemical modification of wood – a combined approach for exclusive, high-demanding performance products

Review of Functional Treatments for Modified Wood