Abstract:The existence of cavities in shallow ground strata is one of the important causes of urban road collapse under the disturbance of tunnel excavation. Thus, this paper discusses the convergent deformation mode of ellipsoidal cavities. To this end, the convergent deformation of a cavity and the overall displacement of a tunnel were comprehensively examined. A three-dimensional symmetrical calculation model of the soil deformation under the combined action of the tunnel and the cavity was also established. Moreover, three-dimensional formulas for calculating the soil deformation and the surface settlement of the upper part of the tunnel and the cavity were derived. The influence of the different positions of the cavity on the surface settlement of the upper part of the tunnel was also examined. Further, the change in the soil settlement with the direction of the tunnel excavation and the depth of burial of the cavity was analyzed. The results show that the calculated settlement curves are consistent with the ones reported in the related literature. The cavity can also aggravate the surface settlement and deformation of the soil caused by the tunnel excavation. When the cavity is directly above the tunnel, the surface settlement curve is symmetrically distributed. As the position of the cavity changes, the overall settlement curve shifts to the direction of the cavity, showing asymmetry. Additionally, along the x-axis direction of the shielded tunnel, the surface settlement gradually increases to a limit value with a decrease in x and slowly declines to zero as x rises. Finally, along the depth of burial of the cavity, the settlement of the soil continues to enlarge; also, the growth rate of the soil settlement continues to increase further at positions closer to the cavity and the tunnel until it reaches a critical maximum.

Three-dimensional Shape of Unstable Soil of Shield Tunnel Surface in Sands

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

Numerical Modeling of Soil and Structure Behavior for Tunneling in Different Types of Soil

Upper Bound Analysis of Tunnel Face Stability in Layered Soils

Supporting Pressure for Earth Pressure Balance Tunnel Face Stability when Tunneling is Implemented in Saturated Sandy Soil

Total Thrust Calculation and Test Research for Soil Pressure Balancing Shield Tunneling

STABILITY ANALYSIS OF TUNNEL WORKING FACE IN COMPOSITED SANDY SOIL

Face stability analysis of shield-driven tunnels shallowly buried in dry sand using 1-g large-scale model tests

Stability Analysis of a Shield Tunnel in Unsaturated Soil Considering the Soil Arch Effect

A Modified Wedge-Prism Model for Calculating the Limit Support Pressure of a Shallow Shield Tunnel Face in Unsaturated Sandy Soil

Research on Three-Dimensional Soil Deformation Induced by Double-O-Tube Shield Tunneling

Three-Dimensional Analytical Solution for Passive Limit Support Pressure During Shield Tunnelling

Analysis of Superimposed Stress of Surrounding Soil Due to Shield Tunneling

Soil Body Deformation Caused by Construction of a Double-Line Shield Tunnel with Multiple Factors

Model Test on the Influence of Surcharge, Unloading and Excavation of Soft Clay Soils on Shield Tunnels

A 3D torus-slice model for limit equilibrium analysis of shield tunnel face under soil arching effect

3D Analytical Solution of Soil Deformation Induced by Shield Tunnelling Construction

A Method for Calculating Soil Deformation Induced by Shielded Tunneling in Ground Stratum with Cavities

Stability Analysis of 3D Tunnel Face of Shallow Rectangular Shield Tunnel

An Analytical Solution to Ground Stresses Induced by Tunneling Considering Ground Surface Boundary Conditions and Gravity

3d Tunnel Face Stability Of Cross-River Shield Tunnel Considering Water Pressure