Abstract:The DPF regeneration is crucial for reducing backpressure, minimizing negative impacts on engine power and fuel economy, but the changes in particulate emission characteristics it brings are worth studying. In this study, the influence of DPFs with different soot loadings on exhaust back pressure and particle emission characteristics, as well as the particle number emission, particle size distribution, and thermal field distribution characteristics during regeneration was investigated based on engine bench test. Results reveal that the exhaust back pressure increases linearly with the engine speed, as well as the soot loading. The increase of DPF soot loading leads to a considerable increase in the reduction efficiency of particle number (PN) and particulate matter emissions, especially for the accumulation mode particles. Moreover, the performance in reducing nucleation mode particles is markedly better than that of accumulation mode ones, and this effect is greatly influenced by the engine operating conditions. At the beginning of DPF regeneration, the PN concentration increases sharply, especially the nucleation mode particles. After regeneration, the PN emissions decrease by two orders of magnitude. During regeneration, the particle size distribution exhibits a unimodal distribution, with the peak value increasing considerably and shifting toward smaller particle sizes. After regeneration, the particle size of the PN peak value slightly decreases and markedly shifts toward larger sizes, the accumulation mode particle concentration increases by 7.2 times, and the nucleation mode particle concentration increases by 2.6 times. Before the DPF regeneration, the axial temperature gradually decreases along the direction of the airflow, and the radial temperature gradually decreases from the center to the edge. During regeneration, the highest temperature occurs in the center of the DPF cross-section, whereas the temperature peak at the outlet interface occurs at the middle position of the DPF. The findings of this paper can provide scientific references to formulation and optimization of DPF regeneration strategies.

Research on the Working Performance of Carbonized Micro-wood Fiber DPF

Comparison of the Use of Real Diesel Soot and Soot Surrogate in the Performance Analysis of Diesel Particulate Filters

Experimental Study on the Influence of DPF Micropore Structure and Particle Property on Its Filtration Process

The Application of Two Closely Coupled DPFs as the After-treatment System

Investigation of Diesel Particulate Filter Performance under Typical Failure Conditions

Methodology of diesel particulate filter testing on test bed for non-road engine application

Effect of Structure Parameters of Catalyst Substrate on the Performance of Diesel Particulate Filter

Experimental Investigation on the Influence of Filtration Velocity on Particulate Deposition Characteristics in DPF

Lumped model for evaluating dynamic filtration and pressure drop behaviour in diesel particulate filters

Experimental Study and Numerical Analysis on Pressure Drop and Temperature Field Characteristics of Asymmetric Cell Technology Diesel Particulate Filter for Silicon Carbide

Numerical simulation of diesel particulate filter flow characteristics optimization: From the perspective of pore structure parameters and inlet velocity

Simulation Based Visual Study of Particulate Deposition Characteristics in Millimeter-Scale Channels of a Diesel Particulate Filter

Particle filter performance of soot-loaded diesel particulate filter and the effect of its regeneration on the particle number and size distribution

Effect of structural parameters on diesel particulate filter trapping performance of heavy-duty diesel engines based on grey correlation analysis

Experimental Investigation on the DPF High-Temperature Filtration Performance under Different Particle Loadings and Particle Deposition Distributions

A Method of Improving of Capture Efficiency of Radial Diesel Particulate Filter

Ash deposited in diesel particular filter: a review

An Experimental Investigation of the Impact of Washcoat Composition on Gasoline Particulate Filter (GPF) Performance

Application of Diesel Particulate Filter on In-Use On-road Vehicles

Study on Burner Type Diesel Particulate Filter System Using Compressed Air from Turbocharger

Modeling of Soot Fragmentation That Proceeds in a Catalyzed Diesel Particulate Filter of a Diesel Engine