Abstract:As a typical non-destructive testing method, electromagnetic acoustic testing is often used to test metal materials and components. The main shortcoming in practical application is poor energy conversion efficiency, especially in the case of non-ferromagnetic materials. To solve this problem, this article proposed a Lamb electromagnetic acoustic transducer (EMAT) for ultrasonic testing of non-ferromagnetic plates. The new type of EMAT consists of a track coil and a group of periodic permanent magnets (PPMs). Conventional Lamb wave EMATs typically use meander coil and rectangular magnet to generate Lorentz forces with a periodic distribution. The track coil provides stronger eddy currents than meander coil, and the PPMs provide more even bias magnetic fields than rectangular magnet, which generates Lorentz forces with a similar periodic distribution and larger values, compared with the conventional Lamb wave EMAT. Then two-dimensional finite element (FE) simulation models of the conventional meander-line-coil (MLC) and TCPPM transducers were completed to compare the distribution of eddy currents, bias magnetic fields and Lorentz forces. Eventually, a series of transducers with coils of different sizes were manufactured and incorporated into the experimental study. The experimental results proved that the TCPPM transducers could generate and receive more powerful ultrasonic Lamb waves than the conventional MLC EMATs. Due to the dispersion characteristics, pure A0 or S0 mode of ultrasonic Lamb waves can be generated and received by selecting suitable frequencies. Compared with the MLC EMATs, the maximum amplitudes of the A0 and S0 modes were increased by 18.9 dB and 10.4 dB, respectively. The contribution of the direction of Lorentz forces to A0 and S0 mode Lamb waves was also verified by comparing the signals of three groups of TCPPM EMATs with different structures.

Formation of Two-Way Lamb Waves and Force Potential Wells Using Single Conventional Ultrasonic Transducer and Sheep Horn Shaped Metal Piece

Escalated Deep-Subwavelength Acoustic Imaging with Field Enhancement Inside a Metalens

Relative Position Control and Coalescence of Independent Microparticles Using Ultrasonic Waves

Development of a Helical Lamb Wave Electromagnetic Acoustic Transducer for Pipeline Inspection

Compound Manipulation of Micro-Particles Using a Single Device:Ultrasonic Trapping, Transporting, and Rotating

Design of Electromagnetic Acoustic Transducer for Helical Lamb Wave With Concentrated Beam

An Emat Design with Track Coil and Periodic Permanent Magnets for Enhanced Ultrasonic Lamb Wave Generation in Non-Ferromagnetic Plates

Development of Highly Efficient Lamb Wave Transducers toward Dual-Surface Simultaneous Atomization

Building the Isotropic Acoustic Potential Well with Strong Constraint Boundary to Improve the Stability of Ultrasonic Transportation

Particle collection using a Lamb wave device with a non-piezoelectric glass substrate

A Method for Optimizing Excitation of Electromagnetic Ultrasonic Lamb Wave

Modeling of an Omni-Directional Electromagnetic Acoustic Transducer Driven by the Lorentz Force Mechanism

A Lorentz Force EMAT Design with Racetrack Coil and Periodic Permanent Magnets for Selective Enhancement of Ultrasonic Lamb Wave Generation

Design and Analysis of Ultrasonic Composite Transducer with a Quarter-wave Taper Transition Horn

Theoretical analysis and experimental observation of frequency mixing response of ultrasonic Lamb waves

A Metamaterial Ultrasound Mode Convertor for Complete Transformation of Lamb Waves into Shear Horizontal Waves.

A Lamb Waves Based Ultrasonic System for the Simultaneous Data Communication, Defect Inspection, and Power Transmission

An Ultrasonic Laminated Transducer for Viscoelastic Media Detection

Physical Sensors Based on Lamb Wave Resonators

A Self-Assembled Metamaterial for Lamb Waves

Modulating Lamb waves with a tunable ultrasonic lens