Abstract:There has been much interest recently in the area of engineered materials with unusual electromagnetic properties known as metamaterials. Since the first DNG metamaterial, which consists of metallic split ring resonators (SRRs) and wires, was reported [1], numerous investigations have been conducted both theoretically as well as experimentally in order to make use of the metamaterial to improve the performance of the RF devices, and reduce their size [2, 3]. Particularly, an one-dimensional (1D) miniaturized cavity resonator (MCR) consisting of DNG and DPS bilayer was proposed in [4]. Very recently, the idea of the 1D MCR in [4] was realized in a rectangular cavity, which was filled partially with DNG consisting of Ω-alike inclusions and partially with air [5]. However, the width of the MCR in [5] is still not small enough (it is 22 mm) although the length is small (only 13 mm) at its resonance frequency of 9.6 GHz, due to the fact that the width must be equivalent to the integer multiples of the half of the resonance wavelength. In this presentation, we propose a further miniaturization approach for the MCR through extending the analysis to a three-dimensional (3D) case. We explore the resonance equation solutions of the general case of a 3D rectangular cavity resonator filled with anisotropic metamaterials bilayer. It is shown that both the resonant modes in such a resonant cavity and the transmission characteristics of its corresponding waveguide are closely dependent on the spatial dispersion relation of the filling anisotropic metamaterials. Based on the concept mentioned above, a novel miniaturized rectangular cavity resonator (MRCR) is designed by means of CST’s MW STUDIO simulation tools. Compared with the MCR in [5], the MRCR’s width and length normalized to the resonance wavelength are shorten simultaneously.

Miniaturized Microstrip-Based Metamaterials Quasi-Standard Transmission Lines Unit

Compact Triplex-layer Metamaterials Design for Wireless Power Transfer Efficiency Enhancement

One-dimensional Stacking Miniaturized Low-Frequency Metamaterial Bulk for Near-Field Applications

Subwavelength Metamaterial Unit for the Applications of Compact Microstrip Filters and Diplexers

Transmission Line Characteristics Based on Metamaterials Substrate

Ultra Sub-Wavelength Gigahertz Resonator for Constructing Silicon-Substrate Metamaterials

Novel Miniaturized Planar Left-Handed Metamaterial Transmission Lines Verified by the Backward Wave Property

Compact Microwave Passive Components Based On The Metamaterial Unit Cells

A Novel Miniaturized Metamaterial Microwave Absorber with Quasi-full-angle Stability

Laminated miniaturized low-frequency metamaterial block for near-field wireless power transmission applications

Miniaturized Electric Resonance Metamaterial

A Novel Compact Left-Handed Transmision Line with Improved Split-Ring Resonators

Compact Meta-Material Transmission Line Balun Based on Meander Lines Structure and MEMS Technology

On-Chip Impedance-Optimized Microstrip Transmission Line For Multi-Band And Ultra-Wide-Band Microwave Applications

Scaling and Cascading Compact Metamaterial Photonic Waveguide Filter Blocks

Metamaterials Cavity Resonator with Simultaneously Shorten Length and Width

Antennas and Microwave Passive Device Miniaturization Design and Ralization by Left-Handed Metamaterials

A new shunt-stub-based meander artificial transmission line in miniaturized microwave passive components

Cross‐talk reduction in metamaterial and non‐uniform transmission lines

Compact Triple-Band Planar Monopole Antenna With Single Metamaterial Unit

Homogenization of Artificial Media with a Transmission Line Approach