Abstract:Abstract Metal-dielectric-metal (MIM) waveguide coupling systems based on surface plasmon polaritons (SPPs) are designed and studied. The finite element method is used to simulate the transmission spectra of structures in the whole simulation process. One waveguide coupling system consists of an inverted T-shaped cavity with defect (ITD) and a waveguide with a metal wall. The filter band appears in the transmission spectrum due to the opposite direction of two Fano resonances. The filter band width and the filtering range can be tuned effectively by changing the structure parameters. In this system, the center frequency and bandwidth of the filter band are 1330 nm and 114 nm, respectively. The insertion loss and reflection loss are −1.41 dB and −16.89 dB, respectively. The optimization is carried out on the basis of the first system in order to improve the filtering performance. Optimized waveguide coupling system contains an ITD and a waveguide with a slot cavity. Electromagnetically induced transparency (EIT) and Fano resonance exist simultaneously, and the filter band is induced in the transmission spectrum. In this system, the center frequency and bandwidth of the filter band are 1412 nm and 120 nm, respectively. The insertion loss and reflection loss are −0.50 dB and −37.32 dB, respectively. EIT and Fano resonance can not only be regulated independently, but also be regulated simultaneously by changing the structural parameters. And the intensity of EIT and the width of the filter band can be manipulated with changes of the structural parameters. The transmission response of SPPs propagating in the structure can be adjusted dynamically. Moreover, these novel SPPs optical waveguide structures have good filtering efficiency and can meet different filtering needs. These results show that the proposed systems are promising for filter, slow light device and photonic device integration applications.

Scaling and Cascading Compact Metamaterial Photonic Waveguide Filter Blocks

Topologically-optimized On-Chip Metamaterials for Ultra-Short-range Light Focusing and Mode-Size Conversion

Engineering Waveguide-Cavity Resonant Side Coupling in A Dynamically Tunable Ultracompact Photonic Crystal Filter

Efficient Coupling of Evanescent Waves in Rectangular Waveguides Based on Ultrathin Planar Capacitive Metasurfaces

Single-step-etched ultra-compact metamaterial grating coupler enabled by a hierarchical inverse design approach

PHOTONIC CRYSTALS & METAMATERIAL FILTERS BASED ON 2D ARRAYS OF SILICON NANOPILLARS

Design and Simulation of a Compact Plasmonic Photonic Crystal Fiber Filter with Wide Band and High Extinction Ratio

Metamaterial High Pass Filter Based on Periodic Wire Arrays of Multiwalled Carbon Nanotubes

Acoustic wave filtering strategy based on gradient acoustic metamaterials

Subwavelength Meta-Waveguide Filters and Meta-Ports

Design of miniaturized wide band-pass plasmonic filters in MIM waveguides with tailored spectral filtering

Metatronics-inspired high-selectivity metasurface filter

Filter-Assisted Metasurface for Full-Space Wavefront Manipulation and Energy Allocation

High-Q cascaded single-passband microwave photonic filter based on an optical-electrical feedback loop

Free-standing Plasmonic Metal-Dielectric-metal Bandpass Filter with High Transmission Efficiency

Structuring Band-Pass Dispersion with Cascaded High- and Low-Pass Optical Metatronic Metasurfaces

Band-stop filter based on tunable Fano resonance and electromagnetically induced transparency in metal-dielectric-metal waveguide coupling systems

On-Chip Cascaded Bandpass Filter and Wavelength Router Using an Intelligent Algorithm

Quickly tunable ultra-narrow filter via a metal film waveguide

Plasmonic Waveguide based Filter Design with Demultiplexing and Slow Light Capabilities

Ultra-compact Primary Colors Filter Based on Plasmonic Digital Metamaterials