Abstract:Considerable quantities of Nd-Fe-B magnet wastes are produced every year worldwide. Some Nd-Fe-B magnet wastes in the bulk form, produced during manufacturing, have low coercivity and cannot meet the requirements for applications. Finding an effective way to reuse those wastes by improving the coercivity, without powdering or reproducing process, becomes very important for saving energy and raw materials in manufacture. In this work, the grain boundary diffusion process is carried out on waste Nd-Fe-B sintered magnets by using Pr70Cu30 as a diffusion medium. The effects of diffusion temperature, diffusion time, and annealing time on the magnetic properties of the magnets are investigated. It is found that the coercivity increases when the diffusion temperature increases from 500 to 800 degrees C, the diffusion time increases from 1 to 3 h, or the annealing time increases from 1 to 3 h. By comparing the diffused sample with the simply heat treated sample, we find that the coercivity enhancement by grain boundary diffusion process indeed results from the infiltration of Pr and Cu elements. The coercivity of the magnet increases by 51.9%, from 7.88 kOe (1 Oe = 79.5775 A/m) to 11.97 kOe, after 4-hour diffusion at 800 degrees C followed by 3-hour annealing, with a negligible reduction of remanence B-r, achieving a 99.8% recovery of coercivity compared with the commercial N35 magnet. It is noted that 500 degrees C annealing for 3 h after 800 degrees C diffusion only slightly increases the coercivity by 4.6%, from 11.44 kOe to 11.97 kOe, which indicates that the annealing process after Pr-Cu grain boundary diffusion may be not indispensable. Based on the microstructure analysis, the diffusion of Pr and Cu is confirmed. However, the distributions of Pr and Cu are inhomogeneous within a range of tens of microns near the surface even though the diffusion has spread throughout the magnet. The structure of main phase grains separated by the continuous grain boundary phase is formed after the grain boundary diffusion process while the core-shell structure is not observed, which suggests that the modification of the grain boundary structure is the main reason for the coercivity improvement. Cu element plays an important role in forming continuous grain boundary phase. In addition, the electrochemical corrosion test shows that higher corrosion current is obtained in the diffused magnet than in the original magnet, though the corrosion potential is improved. The reduced corrosion resistance may be related to the increased RE-rich phase content and the formation of continuous grain boundary phase. The present work is of great importance for increasing the production yield of Nd-Fe-B magnets.

Coercivity Enhancement in Pr9.5Fe83Zr2B5.5 Magnetic Nanomaterials

High coercivity Pr2Fe14B/α-Fe nanocomposite permanent magnets with Zr addition

Clarifying the Dominated Coercivity Enhancement Mechanism of Grain Boundary Diffused Nd-Fe-B Magnets by Pr-based Alloys

Coercivity Enhancement in Dy-free Nd–Fe–B Sintered Magnets by Using Pr-Cu Alloy

Microstructure refinement and significant improvements of magnetic properties in Pr2Fe14B/α-Fe nanocomposites

Coercivity Enhancement in Anisotropic Pr13fe79.4b7nb0.3ga0.3 Powders

Beneficial Effect of the Substitution of Co for Fe on the Magnetic Properties of Melt-Spun Pr2Fe14C/α-Fe-type Nanocomposite Magnets

High coercivity Pr2Fe14B magnetic nanoparticles by a mechanochemical method

Synthesis, structures and magnetic properties of Pr-lean Pr2Fe14B/Fe3B nanocomposite alloys

Significantly Enhancing the Coercivity of NdFeB Magnets by Ternary Pr-Al-Cu Alloys Diffusion and Understanding the Elements Diffusion Behavior

Coercivity Enhancement Of Anisotropic Die-Upset Nd-Fe-B Powders By Pr-Cu Alloy Diffusion

Influence of Co substitution for Fe on the magnetic properties of nanocrystalline (Nd,Pr)-Fe-B based alloys

Magnetic reversal and magnetic memory effect in melt-spun Pr2Fe14B/α-Fe nanocomposite ribbons

Improvement of Coercivity and Thermal Stability of Anisotropic Nd13fe79.4b7nb0.3ga0.3 Powders by Diffusion of Pr-Cu Alloys

Enhancement of magnetic properties of nanocomposite Pr2Fe14B/α-Fe magnets by small substitution of Dy for Pr

Alloying Pr-Tb-Cu diffusion source with Ni for enhancing both coercivity and corrosion resistance of Nd-Fe-B magnets

Towards the difference in coercivity enhancement of nanocrystalline Nd-Fe-B alloys with Pr and Ho substitution

Coercivity enhancement of waste Nd-Fe-B magnets by Pr70Cu30 grain boundary diffusion process

Effect of P and Zr on the microstructure and magnetic properties of nanocomposite Pr2Fe14B/α-Fe ribbons

Effect of Zr Addition on the Magnetization Reversal Behavior for Α-Fe/pr2fe14b Nanocomposite Alloys

Magnetic Properties of Pr–Fe–B Melt-Spun Ribbons with High Coerecivity