Abstract:Here we report a high power, pulsed optical parametric oscillator (OPO) at 3.5 mu m by using a MgO:PPLN crystal as the gain medium. The OPO itself was pumped by a semiconductor diode-seeded, Yb3+-doped fiber Master Oscillator Power Amplifier (MOPA) operating at 1062nm. An OPO output power as high as 11W at an overall slope efficiency of 67% was achieved, with nearly 2.7W and 8.2W of optical power obtained at 3.5 mu m and 1.5 mu m respectively. Due to the fast response time of the external modulator, it is possible to implement active pulse shaping on a nanosecond time-scale. Using adaptive pulse shaping of the seed laser (using an external modulator) we demonstrated a reduction in the impact of dynamic gain saturation and optical Kerr/Raman nonlinearities within the fibre MOPA obtaining shaped signal and idler pulses at the OPO output and reduced spectral bandwidths. We have also investigated the dependence of the OPO build-up time and energy transfer efficiency on pump pulse peak power and shape. The build-up time shows an exponential dependence on the pulse peak power and as expected decreases with an increase in pulse peak power. Analyzing the shift in spectral peak at 1.5 mu m it is possible to estimate the internal temperature of the crystal for various pump powers. Our experiments were pump-power limited and considerable scope remains for further power-scaling of the OPO output using this approach.

6 Mj, High-Average-power, All-Fiberized Q-switched Fiber Master Oscillator Power Amplifier with Low Repetition Rate

All-fiberized master oscillator power amplifier structured narrow-linewidth nanosecond pulsed laser with 505 W average power

All-Fiber Millijoule Energy and Nanoseconds Pulse Operation of A High Beam Quality Multi-Stage Pulse-Pumped Yb-Doped Amplifier Cascade

High pulse energy, narrow-linewidth all-fiber 1064 nm picosecond master oscillator power amplifier system

13.9-Mj All Fiber Wide Band Ytterbium-Doped Fiber Amplifier

High-energy single-frequency pulsed fiber MOPA at 1064 nm based on a hybrid active-fiber

1 Mj, 500 Khz Nd:YAG/Nd:YVO4 MOPA Laser with a Nd:YAG Cavity-Dumping Seed Laser

High-power Multichannel PPMgLN-based Optical Parametric Oscillator Pumped by a Master Oscillation Power Amplification-Structured Q-switched Fiber Laser

Single-frequency pulsed laser source with hybrid MOPA configuration

Single Mode Mopa Structured All-Fiber Yb Pulse Fiber Amplifier at Low Repetition

Widely Tunable Pulse Duration 100 mJ Single-Mode MOPA System Based on Yb-Doped Tapered Double-Clad Fiber and Nd:YAG Solid-State Amplifiers

High Peak Power Hybrid Mopa Laser With Tunable Pulse Repetition Frequency And Pulse Duration

All-fiber single frequency pulsed amplifier with 412 W peak power output operating at 1030 nm

Externally Modulated, Diode Seeded Yb3+-Doped Fiber Mopa Pumped High Power Optical Parametric Oscillator

High-power PPMgLN-based Optical Parametric Oscillator Pumped by a Linearly Polarized, Semi-Fiber-coupled Acousto-Optic Q-switched Fiber Master Oscillator Power Amplifier.

1.2 kW, 20 kHz Nanosecond Nd:YAG Slab Laser System

120 W High Repetition Rate Nd:Yvo4 Mopa Laser with A Nd:Yag Cavity-Dumped Seed Laser

High-power, highly efficient, all-fiber wavelength-tunable polarization-maintaining Tm-doped fiber MOPA system

Pulsed Pumped Yb-doped Fiber Amplifier at Low Repetition Rate

All-fiber 3.4-W 2.8-µm ultra-short pulse MOPA system seeded by the soliton self-frequency shift of 2-µm pulses

High Power Diode-Side-Pumped 1 112-Nm Nd:Yag Laser Based on Master-Oscillator Power-Amplifier System