Externally Modulated, Diode Seeded Yb3+-Doped Fiber Mopa Pumped High Power Optical Parametric Oscillator

S. U. Alam,Kangkang Chen,Dejiao Lin,Yonghang Shen,Shuangshuang Cai,Bo Wu,Peipei Jiang,Andrew Malinowski,David Richardson
DOI: https://doi.org/10.1117/12.813658
2009-01-01
Abstract:Here we report a high power, pulsed optical parametric oscillator (OPO) at 3.5 mu m by using a MgO:PPLN crystal as the gain medium. The OPO itself was pumped by a semiconductor diode-seeded, Yb3+-doped fiber Master Oscillator Power Amplifier (MOPA) operating at 1062nm. An OPO output power as high as 11W at an overall slope efficiency of 67% was achieved, with nearly 2.7W and 8.2W of optical power obtained at 3.5 mu m and 1.5 mu m respectively. Due to the fast response time of the external modulator, it is possible to implement active pulse shaping on a nanosecond time-scale. Using adaptive pulse shaping of the seed laser (using an external modulator) we demonstrated a reduction in the impact of dynamic gain saturation and optical Kerr/Raman nonlinearities within the fibre MOPA obtaining shaped signal and idler pulses at the OPO output and reduced spectral bandwidths. We have also investigated the dependence of the OPO build-up time and energy transfer efficiency on pump pulse peak power and shape. The build-up time shows an exponential dependence on the pulse peak power and as expected decreases with an increase in pulse peak power. Analyzing the shift in spectral peak at 1.5 mu m it is possible to estimate the internal temperature of the crystal for various pump powers. Our experiments were pump-power limited and considerable scope remains for further power-scaling of the OPO output using this approach.
What problem does this paper attempt to address?