Abstract:We propose a new method for the chirped pulse spectrum shaping, which is significant in chirped pulse amplification (CPA) system to compensate the gain narrowing and the gain saturation, to obtain the shortest compressed pulse, and to improve the signal-to-noise ratio (SNR) of the output, while simultaneously increasing the amplifier efficiencies. This method is based on a grating system to decompose the chirped pulse spectrum to a spatial space, a microstructure on a multilayer dielectric thin film as a functional reflector to shape the space distribution, and a synthesis system to compose this space distribution to a shaped frequency chirped pulse before incidence into the next amplifier stage. The results show that the damage threshold by the high-power laser can be enhanced, and this functional reflector can be fabricated in an easy and cheap way, in which the accuracy in lithography is 1 mu m, the etching tolerance is 35 nm, and the roughness of the etching surface is 8.5 nm. In addition, the phase aberration is less than 12 mrad in the chirped bandwidth of a few tens of nanometers, and the spatial distribution of the final output almost remains. The studies show that the energy integral of the output chirped pulse is extracted 17% and 29.5% more with center and off-center modulations, respectively, compared with the normal amplification. Moreover, the SNR has enhanced to 10(10): 1 at 10 ps after spectrum shaping, which enhances the SNR near 1 2 orders than that without the spectrum shaping. (C) 2010 Optical Society of America

Chirped-Pulse Amplification System Based on Chirp Reversal and Near-Field Spatial Reversal with Common Tiled Grating Pair As Stretcher and Compressor

High Dispersion Compensation Mirrors for Pulse Stretching in Chirped Pulse Amplifiers

Chirped fiber grating with the apodization of parabola squared function for dispersion compensation of chirped Gaussian pulses

Experimental verification and analysis of wavelength effect on pulse stretching and compressing in mid-IR chirped-pulse amplification

A Pulse Compressor for A Chirped-Pulse Amplification System Based on A Frequency-Doubling Crystal and Grating

Photonic Generation of Chirped Microwave Signals with High Time-Bandwidth Product

Demonstration of Chirped-Pulse Compression with an Object-Image-grating Self-Tiling Grating Compressor

Amplification of Optical Pulse Signal Using Chirped Fiber Grating

Chirped Pulse Compression in Nonuniform Plasma Bragg Gratings

Numerical Study of Spatial Chirp Distortion in Quasi-Parametric Chirped-Pulse Amplification

Broadband, Efficient, and Robust Quasi-Parametric Chirped-Pulse Amplification.

Investigation of Spatial Chirp Induced by Misalignments in a Parallel Grating Pair Pulse Stretcher

Experimental demonstration on 400 nm-scale bandwidth optical parametric chirped-pulse amplification based on mixed cascaded crystals

Design and Experiment of 8-Pass Laser Pulse Stretcher

Influence of Grooves Misaligned Reflection Grism Stretcher on Femtosecond Pulse in Chirped Pulse Amplification System

Noise Filtering in Parametric Amplification by Dressing the Seed Beam with Spatial Chirp

TRANSFORM-LIMITED SPECTRAL COMPRESSION BY USING NEGATIVELY CHIRPED PARABOLIC PULSE IN ALL-NORMAL DISPERSION PHOTONIC CRYSTAL FIBERS

Quasi-parametric amplification of chirped pulses based on a Sm 3+ -doped yttrium calcium oxyborate crystal

Optical Parametric Chirped Pulse Amplification Based on Photonic Crystal Fibre

Surface-Reflection-Initiated Pulse-Contrast Degradation In An Optical Parametric Chirped-Pulse Amplifier

Spectrum Shaping of an All Nd:Glass Cpa 1-10 Ps Kilojoule Petawatt-Class Laser System