Abstract:Coherent beam combining of pulsed fibre lasers is a promising method for power scaling while simultaneously maintaining good beam quality. We propose and demonstrate a scalable architecture for coherent beam combining of all-fibre pulsed amplifiers with active phase control using the stochastic parallel gradient descent (SPGD) algorithm. A low-pass filter is introduced to eliminate the fluctuation of the metric function caused by pulsed lasers and to extract the exact phase noise signal. Active control is thereby based on the SPGD algorithm, resulting in stable coherent beam combining at the receiving plane even in a turbulent environment. Experimental results show that the fringe visibility of the long exposure pattern increases from 0 to 0.4, and the power encircled in the main-lobe increases by 1.6 times when the system evolves from the open-loop phase-locking scheme to the closed-loop scheme. This architecture can be easily scaled up to a higher power by increasing the number of amplifying channels and the power of a single amplifier.

Active coherent beam combination of two high-power single-frequency nanosecond fiber amplifiers.

Coherent Combining of Two Pulsed Solid State Lasers

Active coherent beam combining of a five-element, 800 W nanosecond fiber amplifier array.

Actively Coherent Beam Combining of Two Single-Frequency 1083 Nm Nanosecond Fiber Amplifiers in Low-Repetition-Rate

Coherent Beam Combination of Three Two-Tone Fiber Amplifiers Using Stochastic Parallel Gradient Descent Algorithm

Coherent Beam Combining of Multi-Wavelength Lasers Based on Stochastic Parallel Gradient Descent Algorithm

Coherent beam combining of 137 W 2 × 2 fiber amplifier array

Coherent beam combining of kilo-watt high-average-power narrow-linewidth nanosecond fiber amplifiers

The 260-W Coherent Beam Combining of Two Compact Fibre Amplifier Chains

1.2 Kw Average Power from Coherently Combined Single-Frequency Nanosecond All-Fiber Amplifier Array

Coherent Beam Combining of Two Fiber Amplifiers Seeded by Multi-Wavelength Fiber Laser

Coherent Beam Combining of Pulsed Fibre Amplifiers with Active Phase Control

108 W Coherent Beam Combining of Two Single-Frequency Tm-doped Fiber MOPAs

Tiled-aperture Coherent Beam Combining of Two High-Power Fibre Amplifiers

Coherent beam combining of triple-wavelength fiber laser based on cascaded fiber Bragg grating array

Coherent Beam Combination of Eight Watt-Level Polarization-Maintained Fiber Amplifiers

Coherent Beam Combination Of A Hexagonal Distributed High Power Fiber Amplifier Array

Coherent Beam Combining of a Fiber Lasers Array Based on Cascaded Phase Control

7.1 Kw Coherent Beam Combining System Based on a Seven-Channel Fiber Amplifier Array

High Average Power Coherent Femtosecond Pulse Combining System Based on an All Fiber Active Control Method

Simultaneous Spectrum and Coherent Combining by Active Phasing Dual Two-Tone All-Fiber MOPA Chains.